iSeries 0907 Waterproof 6 Mic Case SKB 3i-0907-MC6 allows 6 mics to be stored horizontally on two separate layers of foam (3 on top and 3 on bottom). Each microphone cutout measures 1.5 in. wide by 6.75 in. long with two perforated removable foam pieces, one located on each end allowing microphone sizes up to 8.5 inches in length. The lid has convoluted foam for a compression fit.
Interior Dimensions: 9 x 7 x 6 in.
Exterior Dimensions: 10.68 x 9.69 x 6.82 in.
Base & Lid Dimensions: Base: 5.31 in. | Lid: 1.5 in.
Weight: 3.05 Lbs.
Wheels: No Wheels
- Custom Cut Interior for 6 Mics
- Ultra high-strength polypropylene copolymer resin
- UV, solvent, corrosion and fungus resistant (MIL-STD-810F)
- Complete gasket seal makes these cases absolutely watertight (MIL-STD-C-4150J)
- Automatic ambient pressure equalization value (MIL-STD-648C &IP67)
- Resistant to corrosion and impact damage
- Continuous molded-in hinge
- Patented "trigger release" latch system
- Rubber over-molded cushion grip handle
- Custom cut foam to hold six microphones
- Foam Cutouts for Longer/Square Mics
- Million Mile Warranty
- Proudly Made in the USA
UPC Code:
3i-0907-MC6 – 789270991415
SKB’s iSeries injection molded waterproof cases are constructed of ultra high-strength polypropylene copolymer resin and feature a gasketed, waterproof, submersible design (IP67) that is resistant to corrosion and impact damage. Its molded-in hinges, patented "trigger release" latch system, comfortable, snap-down rubber over-molded cushion grip handle, secure stacking, and automatic ambient pressure equalization valve (MIL-STD-648C) all contribute to its military grade design.
SKU | 3i-0907-MC6 |
---|---|
Brand | SKB Cases |
Interior (LxWxH) | 9 x 7 x 6 in. |
Exterior (LxWxH) | 10.68 x 9.69 x 6.82 in. |
Weight | 3.05 Lbs. |
Color | Black |
Lid Depth | 1.5 in. |
Base Depth | 5.31 in. |
Wheels | No Wheels |
Handle | Rubber Over-Molded Cushion Grip Handles |
Latches | Trigger Release Latch System |
Lockable | Pad-Lockable |
Stackable | Yes |
Body Material | Ultra High-Strength Polypropylene Copolymer Resin |
Manufacturing Process | Injection Molded |
Water Resistance | Waterproof |
Rating | ATA Rated |
Certifications | IP67, MIL-STD-C-4150J, MIL-STD-648C, MIL-STD-810F |
SKB CASES LIFETIME WARRANTY
SKB brand hardshell cases are fully warranted against defects in materials and craftsmanship for the life of the case to the original owner. That means, if your case breaks, SKB will supply replacement parts, repair the case, or replace your case for as long as you own it. Proof of Purchase is required for all warranty claims. Electronic components in SKB brand hardshell pedalboard systems are warranted for five years from date of purchase. Soft cases and gig bags are warranted for one year from date of purchase. SKB is not responsible for the shipping cost to our facility. However, SKB will cover all of the costs of repairs and/or replacements, as well as the return shipping. SKB hardshell cases are warranted for life to the original owner only. Cases used rental purposes, used by institutions or schools, modified or used cases are not covered by this warranty. To request a return authorization for a warranty claim, please contact our Customer Service Department at (800) 783-0087
SKB SOFT PRODUCT WARRANTY
SKB Soft Products are fully warranted to the original owner against defects in materials and craftsmanship for one year from purchase. Any defects in workmanship will be covered by SKB. Damages due to accident, improper care, negligence or normal wear, where SKB is not at fault, are not covered on Soft Products. Freight cost to SKB Corporation is the responsibility of the customer. SKB will pay the return freight for warranty product shipped back to the customer.
- SKB iSeries 2015 24-Mic Case$304.99