Nanuk 918 Gun Case for 3 Revolvers
Nanuk 918-GUN Waterproof Gun Case for 3 Revolvers is built to organize, protect, and carry your firearms. Foam insert holds three .22 Caliber to .500 Caliber Revolvers With or Without Trigger Locks. Military approved.
- Holds: 3 Revolvers
- Hard Shell Weapons Case
- Foam Insert Base, Convoluted Foam Lid
- Powerclaw Latching System
- Padlockable
- Stackable
- Soft Grip Handle Stay
- Automatic Pressure Release Valve
- Integrated Lid Stay
- ATA Rated
- Integrated Bezel System
- Impact Resistant NK-7 Resin
- Waterproof IP67 Rated
- Crushproof, Dustproof and Shockproof
- 100% Stainless Steel Hardware
- Meets Airline Carry-on Regulations
- ATA-300/IP6x/IPx7/MIL-STD-810F/ASTM D-4169
- Lifetime Warranty
Interior Dimensions: 14.9 x 9.8 x 8.6 in.
Exterior Dimensions: 16.9 x 12.9 x 9.3 in.
Lid Dimensions: 2.1 in.
Base Dimensions: 6.5 in.
Weight: 7.19 Lbs.
Wheels: No Wheels
UPC Code: 666365024237
Details
NANUK 918 3 Up Revolver Case
Built to organize, protect, carry and survive tough conditions, the NANUK 918 waterproof hard case is impenetrable and indestructible with a lightweight tough NK-7 resin shell and PowerClaw superior latching system. With NANUK’s exclusive locking and latching system, your case stays shut and secured until you are ready to open it. The NANUK 918 3 Up Revolver case is favored by outdoor enthusiasts, sportsmen and sportswomen, law enforcement officers, and shooting sports enthusiasts to protect their most valuable revolvers.
The NANUK 918 3 Up Revolver case’s bulkier and deeper design is ideal revolver storage and transportation. The high-quality, protective custom foam interior carries up to three (3) .22 caliber to .500 caliber revolvers with or without trigger locks. The NANUK 918 waterproof, dustproof and impact-resistant case accommodates revolvers with 3 in. to 8 in. barrel lengths.
The protective foam also has a pre-cut slot for a NANUK Desiccant Pack which protects revolvers from rust and corrosion caused by moisture or high humidity. The NANUK 918 3 Up Revolver Case has two lockable options: two reinforced metal eyelets accommodate TSA-accepted case locks and TSA latch retro-fit kits which are easy to install and add an extra measure of security.
The NANUK 918 3 Up Revolver Case protective case comes with a soft grip and ergonomic handle to make it easy to transport. It also features stainless steel hardware and integrated handle stay to keep the handle out of harm when traveling or during shipping. This transport case is also equipped with an automatic pressure release valve and an integrated bezel system to accommodate custom panels without needing to drill holes so the case stays watertight. This MIL-Spec injection molded case is backed by a lifetime warranty. Meets Airline Carry-on Regulations.
- Holds: 3 .22 Caliber to .500 Caliber Revolvers With or Without Trigger Locks
- Powerclaw Latching System
- Crushproof, Dustproof and Shockproof Case
- Waterproof IP67 Rated
- Impact Resistant NK-7 Resin
- Padlockable
- Stackable
- Soft Grip Handle Stay
- Automatic Pressure Release Valve
- Integrated Bezel System
- Integrated Lid Stay
- 100% Stainless Steel Hardware
- Meets Airline Carry-on Regulations (Check with your airline carrier before traveling)
- Military Approved
- Lifetime Warranty
UPC Code:
NK918-GUN – 666365024237
The Nanuk 918 Advantage
Nanuk 918 Case Features
PowerClaw Latching System
Waterproof IP67 Rated
Impact Resistant NK-7 Resin
Padlockable
Stackable
Bezel System
Handle Stay
Lid Stay
Stainless Steel Hardware
More Information
| SKU | NK918-GUN |
|---|---|
| Brand | Nanuk Cases |
| Lid Depth | 2.1 in. |
| Base Depth | 6.5 in. |
| Interior (LxWxH) | 14.9 x 9.8 x 8.6 in. |
| Exterior (LxWxH) | 16.9 x 12.9 x 9.3 in. |
| Weight | 7.19 Lbs. |
| Max Buoyancy | 40 Lbs. |
| Min Temperature | -20 Degrees F |
| Max Temperature | 140 Degrees F |
| Color | Black |
| Wheels | No Wheels |
| Handle | Soft Grip Comfort Handle |
| Latches | Powerclaw Latching System |
| Lockable | Pad-Lockable |
| Padlock Holes Diameter | 0.340 in. |
| Stackable | Yes |
| Water Resistance | Waterproof |
| Body Material | Impact Proof Lightweight NK-7 Resin |
| Rating | ATA Rated |
| Certifications | ATA-300, IP6x, IPx7, MIL-STD-810F, ASTM D-4169 - Drop Test, ASTM D-4169 - Vibration, ASTM D-4169 - Rainfall |
| Manufacturer SKU | 918S-080BK-0A0-19326 |
| Transporting and Shipping Options |  Small Package Service refers to cases that can ship via UPS, Fedex or USPS and would be charged a standard rate based on the weight. Cases must weigh less than 150 lbs. and meet certain dimensional requirements. Always check the carrier’s small package policy for exact limits. Checked Baggage refers to cases that can be checked in on the airlines that are under 50 lbs. and 62 in. overall or less and would be considered standard size bags that would not incur an oversize fee. Overall dimensions of the case are determined by adding the length, width and height together. Always check your airline’s specific policy, as size and weight limits can vary by carrier and route. |
Reviews
{{title}}
{{{detail}}}