Waterproof Aluminum Panel Kit for Nanuk 955 Case (TOP)

Modify your case with the NANUK Waterproof Panel Kit for 955 Case. This top aluminum panel kit can easily be added to the top of the Nanuk 955 case thanks to the integrated bezel system. Included in the aluminum panel kit is a contoured 1/8 in. thick aluminum panel with stainless steel mounting screws and an adhesive backed die-cut waterproofing gasket.

• (1) 1/8 inch Thick Aluminum Panel
• (1) 1/16 in. Thick Neoprene Gasket with Adhesive on One Side
• (10) Stainless Steel #6 Phillips Head Screws
• Compatible with NANUK 955 Case

TOP ALUMINUM PANEL KIT INSTALLATION

1. Remove the protective film from both sides of the panel and discard.
2. Position the panel in the case.
3. Insert screws through the panel holes into the corresponding holes in the case.
4. Tighten the screws with a Phillips head screwdriver. Use caution not to overtighten the screws.