Nanuk-R 955 Eco-Friendly Wheeled Case with No Foam
Nanuk-R 955 Eco-Friendly Case with Empty Interior is made from post-consumer recycled resin.
- Empty Interior
- Strong Polyurethane Wheels
- One-Handed Retractable Handle
- (3) Soft Grip, Ergonomic Handles
- Impact Resistant Recycled Resin
- Automatic Pressure Release Valve
- Integrated Bezel System
- PowerClaw Superior Latching System
- Padlockable
- ATA Rated
- Integrated Handle Stay
- MIL-Spec Injection Molded Case
- Waterproof IP67 Rated
- Dustproof and Indestructible
- 100% Stainless Steel Hardware
- Stackable
- ATA-300/IP6x/IPx7/MIL-STD-810F/ASTM D-4169
- Lifetime Warranty
Interior Dimensions: 22 x 17 x 10.2 in.
Exterior Dimensions: 25.6 x 20 x 11.82 in.
Lid Dimensions: 2.1 in.
Base Dimensions: 8.1 in.
Weight: 18.4 Lbs.
Wheels: Polyurethane Wheels
UPC Code: 666365102546
Details
Nanuk-R 955 Eco-Friendly Protective Case with Empty Interior and Wheels
The Nanuk NK-R955 Hard Shell Case is built to organize, protect, carry and survive tough conditions, the NANUK-R 955 waterproof hard case is impenetrable and indestructible with a shell in recycled resin and it’s PowerClaw superior latching system. With NANUK’s exclusive locking and latching system, your case stays shut and secured until you are ready to open it.
The NANUK-R 955 includes four (4) powerful latches. At 22 inches long and nearly 10 inches deep, the NANUK-R 955 can store a whole lot of your essentials. The NANUK-R 955 hard case offers the maximum level of protection for all of your personal and professional equipment.
This protective case adds the convenience of wheels to make it much easier to travel with your photo gear, video gear, audio gear, industrial equipment, outdoor gear and much more! Three soft-grip handles make this wheeled case one of the most convenient on the market.
The 955's polyurethane wheels withstand rough terrain while the one-handed retractable handle offers unparalleled usability. No matter where you go, you're guaranteed a smooth ride. For total equipment protection, look no further than the NANUK-R 955 case with retractable two-stage handle and super-smooth polyurethane wheels to get your gear safely and comfortably from point A to point B.
The NANUK-R 955 protective case comes with three (3) soft grip and ergonomic handles to make it easy to transport.
It also features stainless steel hardware and integrated springs to keep the handles out of harm’s way when traveling or during shipping. This transport case is also equipped with an automatic pressure release valve and an integrated bezel system to accommodate custom panels without needing to drill holes so the case stays watertight.
The NANUK 955-R MIL-Spec injection molded case is backed by a lifetime warranty.
- Interior: Empty
- MIL-Spec Injection Molded Case
- Strong Polyurethane Wheels
- One-Handed Retractable Handle
- 3 Soft Grip, Ergonomic Handles
- Waterproof, Dustproof and Indestructible
- Impact Resistant Recycled Resin
- Automatic Pressure Release Valve
- 100% Stainless Steel Hardware
- Integrated Bezel System
- Integrated Handle Stay
- PowerClaw Superior Latching System (4) Powerful Latches
- Padlockable
- Stackable
- Lifetime Guarantee
UPC Code:
NK-R955 – 666365102546
Nanuk-R 955 Case Certifications
IMPACT
DEF-STAN 81-41 / STANAG 4280 - Designed to test resistance to impact (drop) test from a height of 1M. The empty case is dropped once onto its designated base and all perpendicular and parallel faces at an ambient temperature of 23°C.
HIGH IMPACT
ATA 300 CAT 1 - ATA Specification 300 - Category 1 Impact ensures that hard cases, like those meeting these standards, can protect delicate equipment from damage during transportation, even when accidentally dropped from a height, making them a trusted choice for safeguarding valuable gear in rugged travel conditions.
HIGH TEMPERATURE
DEF-STAN 81-41 STANAG 4280 Dry Heat - Designed to test resistance to high temperature/ low humidity climatic conditions. Case is conditioned to 70°C for a period of 48hrs in a climatic chamber. Case is removed from climatic chamber after 48hrs and inspected for damage or other abnormalities.
LOW TEMPERATURE
DEF-STAN 81-41 STANAG 4280 - Designed to test resistance to low temperature climatic conditions. Case is conditioned to -50°C for a period of 16hrs in a climatic chamber. Case is removed from climatic chamber after 16hrs and inspected for damage or other abnormalities.
ANTI DUST
IP6X - IP6X Ingress Protection certifies a product's complete resistance to fine dust particles, making it ideal for safeguarding sensitive electronics, ensuring they remain unaffected by dust in challenging environments such as deserts or construction sites.
WATER SPRAY
DEF-STAN 81-41 / STANAG 4280 - Designed to demonstrate the ability of the case to withstand exposure to continuous water spray that simulates natural rainfall. Spray nozzles are directed above the case at an angle of 45°. All four corners are simultaneously sprayed at a flow rate of 8” per hour for a period of 15 minutes. Once testing is complete the cases are inspected for leaks.
WATERPROOF
IP7X - IPX7 Ingress Protection signifies a product's waterproof capability, allowing it to be submerged in water up to 1 meter deep for 30 minutes, like a rugged smartphone case that shields your phone from water damage even when submerged briefly.
IMMERSION
MIL-STD-810F - The MIL-STD-810F Immersion Test is a military-standard evaluation to confirm that equipment, like hard cases, can endure submersion in water without suffering damage, ensuring their reliability in wet conditions.
The Nanuk-R 955 Advantage
Nanuk-R Collection
Sustainable Choices, Significant Impact
The goal? To reduce waste and avoid unnecessary strain on our planet's resources. Every case from this collection is a step towards a cleaner world, helping to divert waste from landfills and reduce environmental pollution.
Uncompromised Quality and Reliability
Quality is our promise – and these recycled cases are no exception. Each one undergoes strict quality control to ensure it matches the high standards of durability, reliability, and functionality that NANUK is known for. This Eco-Friendly case offers the same stellar protection as our non-recycled cases.
Joining the Movement Towards a Greener Future
Choosing a case from our R-Collection means more than just getting a durable home for your equipment; it's a statement. It's about being part of a larger movement towards sustainability and supporting practices that help preserve our environment for future generations.
Nanuk-R Recycled Case Components
The shell of the NANUK-R Collection is made from a minimum of 95% post-consumer recycled resin.
Recycled Resin: A Sustainable Revolution
The magic of the Nanuk R-Collection starts with the material: recycled resin, specifically post-consumer recycled resin (PCR). It's a fancy way of saying recovered PP from electronic waste is used, transforming it into high-quality resin. It’s not just recycling; it’s a rebirth of materials.
More Information
| SKU | NK-R955 |
|---|---|
| Brand | Nanuk Cases |
| Interior Options | Empty |
| Interior (LxWxH) | 22 x 17 x 10.2 in. |
| Interior Cu. Volume | 2.2 cu ft |
| Exterior (LxWxH) | 25.6 x 20 x 11.82 in. |
| Weight | 18.4 Lbs. |
| Color | Black |
| Lid Depth | 2.1 in. |
| Base Depth | 8.1 in. |
| Max Temperature | 140 Degrees F |
| Min Temperature | -20 Degrees F |
| Max Buoyancy | 140 Lbs. |
| Wheels | Pull Handle Wheeled |
| Handle | Soft Grip Comfort Handle |
| Handle Height (Two Possible Heights) | 33 | 38.5 in. |
| Retractable Handle | 2 Stage Retractable Handle |
| Latches | Powerclaw Latching System |
| Removable Lid | Yes |
| Lockable | Pad-Lockable |
| Padlock Holes Diameter | 0.340 in. |
| Stackable | Yes |
| Body Material | Made from Post-Consumer Recycled Resin |
| Case Shell Material | Made from Post-Consumer Recycled Resin |
| Latch Material | Nylon 66 |
| Handle Material | NK-7 High Impact Polypropylene, TPE |
| Pull Handle Material | Polycarbonate + ABS | Nylon | TPE |
| Wheels Material | Polyurethane | Polycarbonate |
| Pins Material | 304 Stainless Steel |
| Gasket Material | EPDM |
| Back Plate Material | NK-7 High Impact Polypropylene |
| Purge Value Material | Nylon 66, Gore Membrane, Silicone Washers |
| Water Resistance | Waterproof |
| Airline Check In | Yes |
| Airline Carry On | No |
| Rating | ATA Rated |
| Certifications | ATA-300, IP6x, IPx7, MIL-STD-810F, ASTM D-4169 - Drop Test, ASTM D-4169 - Vibration, ASTM D-4169 - Rainfall |
| Manufacturer SKU | 955SR000BK-0A0 |
| Transporting and Shipping Options |  Small Package Service refers to cases that can ship via UPS, Fedex or USPS and would be charged a standard rate based on the weight. Cases must weigh less than 150 lbs. and meet certain dimensional requirements. Always check the carrier’s small package policy for exact limits. Checked Baggage refers to cases that can be checked in on the airlines that are under 50 lbs. and 62 in. overall or less and would be considered standard size bags that would not incur an oversize fee. Overall dimensions of the case are determined by adding the length, width and height together. Always check your airline’s specific policy, as size and weight limits can vary by carrier and route. |
Reviews
{{title}}
{{{detail}}}