SKB 10U x 4U A/V Control and Presentation Case

The SKB 1SKB-R104 is a protective 14U (10U top and 4U front) compact rack case designed with 19.5 in.
Color
Black
Material
LMDPE Polyethylene

Key specifications

Rack Units
14U (10U/4U)
Rackable Depth
19.5 in.
Rackable Width
19 in. Standard EIA
Exterior
23.5 x 23.5 x 17.5 in.
Weight
23 lbs
Wheels
No Wheels

View all specs

Key features

10U Top / 4U Bottom

Side Access Ports

TSA Locking Latches

Steel Threaded Rails

View full description

Made in USA
Made in USA refers to a product that is virtually completely made in the United States of America. Any components not produced in the United States is negligible.
Lifetime Warranty
A Lifetime Warranty refers to a guarantee that the case is fully warranted against defects in materials and craftsmanship for the life of the case to the original owner. If your case breaks, we will supply replacement parts, repair the case, or replace your case for as long as you own it. Some conditions apply, please see individual manufacturer’s warranties.
Satisfaction Guaranteed
Satisfaction Guaranteed is a promise that we ensure our customers are satisfied with the quality of the products they purchase from us and that they are free from any defects in materials or workmanship. We do our absolute best to be sure everyone gets satisfactory service and support.
Water Resistant
Water-resistant means that a case can resist the penetration of water to some degree but is not completely impervious. It offers limited protection against moisture—such as rain, splashes, or brief exposure—but is not designed for full submersion.

Product information

Details, specifications & reviews

Description

SKB 14U (10U x 4U) Computer Based Audio / Video Control and Presentation Case

The 1SKB-R104 is a 10U slanted top and 4U front, rack case that feaatures steel threaded rails, hard lid and doors, side access ports (for cable routing) and has enough space to mount the new 1SKB0-AV8 Retractable Shelf. The one piece base is roto-molded of Linear Medium Density Polyethylene (LMDPE) while the hard front and rear doors and lid are Injection molded of Rubber Modified Styrene (RMS). The back lid provides maximum access to the rack gear.

Two TSA locking SKB patented trigger latches secure the lid while the flat hard top allows for stacking while in transport and storage.

The 1SKB-R104 offers a 10U top and 4U front rack configuration for users who need additional front-mounted equipment capacity. Its 19.5 in. front rail-to-back lid depth, durable construction, and portable design make it a dependable option for compact live sound and equipment systems.

  • Rack Units: 14U
  • 10U Slanted rackmount on top
  • 4U rackmount in front
  • Designed for standard 19 in. rack equipment
  • Rack depth 19.5 in. front rail to back lid
  • Side access ports for cable routing
  • Two (2) TSA locking patented trigger latches
  • Roto-molded for strength and durability
  • Roto-molded of LMDP Linear Medium Density Polyethylene
  • Injection molded front and rear doors and lid
  • Steel rails on front
  • Stackable for storage and transport
  • Includes Million Mile Warranty
  • Proudly Made in the USA

1SKB-R104 - UPC Code: 789270010406 | MPN: 1SKB-R104

Specs
Weight23.000000
ColorBlack
GTIN789270010406
Manufacturer Part Number1SKB-R104
BrandSKB
Manufacturing ProcessRoto Molded
Rack Units14U (10U/4U)
Interior Dimensions19.5 x 19 x 7 in.
Exterior Dimensions23.5 x 23.5 x 17.5 in.
Rack Depth19.5 in.
Rack DesignFixed
Rail TypeThreaded Rails
WheelsNo
LatchesTSA Trigger Release Latches
HandleHeavy Duty Flush Mount Handles
StackableYes
Removable LidYes
Airline Carry OnNo
Airline Check InYes
ATA RatedYes
Water ProtectionWater-Resistant
Exterior MaterialLMDPE Polyethylene
Body MaterialLinear Medium Density Polyethylene (LMDPE)
Customer Return Policy for This ProductStock Case — Standard 30-Day Returns
Transporting and Shipping Options
Small Package
Small Package Service refers to cases that can ship via UPS, Fedex or USPS and would be charged a standard rate based on the weight. Cases must weigh less than 150 lbs. and meet certain dimensional requirements. Always check the carrier’s small package policy for exact limits.
Oversized Checked Baggage
Oversized Checked Baggage refers to cases that can be checked on the airlines but could incur oversize fees. Typically oversize fees can be applied to cases between 50-100 lbs and between 63-126 inches overall. Overall dimensions of the case are determined by adding the length, width and height together. Always check your airline’s specific policy, as size and weight limits can vary by carrier and route.
Reviews

Customer Reviews

Write Your Own Review
You're reviewing: SKB 10U x 4U A/V Control and Presentation Case
Your Rating:
loader
Loading...
Product Questions
Customer Questions
No Questions

Proven in demanding programs

Trusted by teams at government and enterprise organizations

Organizations shown represent customers whose teams have purchased from Specialty Cases.

  • BAE Systems
  • Boeing
  • CACI
  • FEMA
  • Google
  • Idaho National Laboratory
  • Johns Hopkins
  • Lockheed Martin
  • Sacramento County
  • US Department of Defense
  • US Homeland Security

Buy with confidence

What to confirm before ordering

A quick fit-and-logistics check helps prevent delays and keeps your equipment protected.

Confirm usable dimensions

Compare your equipment dimensions with the listed interior dimensions, allowing space for foam, cables, and accessories.

Plan the complete packed weight

Add the case, equipment, foam, and accessories when checking handling requirements or carrier weight limits.

Match protection to transport

Review the product specifications and certifications for the shipping, travel, storage, or field conditions you expect.

Ask before a program purchase

For custom foam, repeat builds, or volume orders, confirm the configuration with our case team before placing the order.

Experience & accountability

Why organizations choose Specialty Cases

The right case is a fit and logistics decision. Our role is to help your team choose with confidence.

Protective case specialists since 1989

Decades of practical experience helping organizations protect equipment during shipping, travel, storage, and deployment.

Application-led guidance

Our team helps match case construction, dimensions, foam, hardware, and handling features to the equipment and transport method.

Custom and program support

Get help with custom foam, repeat configurations, bulk orders, and rollouts for IT, AV, industrial, government, and field teams.

A real team in Maryland

Sales and support are based in Sykesville, Maryland, so buyers can reach a knowledgeable person before or after an order.