Gator Expo Series ATA Case for 80-86 in. LED Screens

Gator GEXPOLED8086 EXPO Series ATA Transport Cases for 80 in. to 86 in. LED Screens

Gator EXPO Series ATA Transport Cases protect large-format LCD and LED displays in transit and storage, built for trade show crews, mobile AV teams, rental houses, corporate event staff, and touring professionals. These are dedicated transport cases without a lift mechanism, so they weigh considerably less and cost considerably less than Gator's E Series and P Series lift models. Use them when you already have stands, mounts, or wall plates at the venue and need the screen to arrive undamaged.

The defining feature of the transport line is an adjustable interior. Rather than a single molded cavity sized to one display, each case uses configurable foam inserts that adjust across a range of panel lengths and depths, typically from 2 to 4 inches deep. That range means one case covers multiple screen models within its diagonal class, which matters when you refresh displays on a different cycle than you refresh cases, or when a rental inventory includes panels from several manufacturers.

Every EXPO transport case is built from heavy-duty 12mm plywood with a laminated exterior and commercial-grade plated hardware. Interior EVA rubber nesting works with the foam inserts to cushion the panel and protect the screen surface and bezel from impact, vibration, and pressure. An aluminum valance runs the perimeter to align the lid precisely to the base for secure, repeatable closure. Recessed twist latches hold the case shut in transit, and spring-loaded rubber grip handles sit flush with the case walls so nothing snags on door frames, other cases, or truck walls during a tight load-out.

Integrated heavy-duty casters let these cases roll from the loading dock to the room under their own weight. Empty weights run from 148 pounds on the smallest model to 286 pounds on the largest, so the smaller cases are realistically a one-person move while the larger ones are not.

Gator EXPO Series ATA Transport Cases are useful for trade show booths, corporate presentations, conference breakouts, digital signage rollouts, retail activations, houses of worship, education and training rooms, production rentals, and any application where the same display travels repeatedly. All EXPO cases are designed and supported by the Gator Cases team in Tampa, Florida, and carry a Limited Lifetime Warranty covering manufacturing defects in material and workmanship. Shipping two displays to the same event? The EXPO dual-screen cases carry a matched pair in a single case.

The GEXPOLED8086 is built for 80 to 86-inch class screens, with an interior adjusting from 72.5 to 76.75 inches in length and a maximum height of 42.9 inches. Exterior dimensions are 84.5 x 20 x 56.06 inches including casters, at 187 pounds empty. At seven feet long, confirm your truck, freight elevator, and doorway clearances before ordering.