Nanuk 935 Waterproof Wheeled Gun Case for 6 Handguns is built to provide secure storage for up to six (6) handguns and ten (10) single or double stack magazines. Heavy duty wheels and pull handle for easy transport. Backed by a Lifetime Guarantee.
Holds: Up To 6 Handguns and Magazines
Interior Dimensions: 20.5 x 11.3 x 7.5 in.
Exterior Dimensions: 22 x 14 x 9 in.
Base & Lid Dimensions: Base: 5.4 in. | Lid: 2.1 in.
Weight: 12.71 Lbs.
Wheels: Wheels and Retractable Handle
UPC Code: 666365018021
NANUK 935 6 Up Gun Case
The NANUK 935 6 Up Pistol is compatible with most guns with a barrel up to 5 in. Built to organize, protect, carry and survive tough conditions, the NANUK 935 waterproof hard case is impenetrable and indestructible with a lightweight tough NK-7 resin shell and PowerClaw superior latching system. With NANUK’s exclusive locking and latching system, your case stays shut and secured until you are ready to open it.
The 935 6 Up Pistol case adds the convenience of wheels to make traveling with your firearms much easier. Three soft-grip handles make this wheeled case one of the most convenient on the market. The 935's polyurethane wheels withstand rough terrain while the one-handed retractable handle offers unparalleled usability.
The NANUK 935 6 Up Pistol case is a favorite of shooting instructors, firearms and security consultants, sportsmen and sportswomen, law enforcement officers, military, gun collectors and enthusiasts. The 935 6 Up Pistol case provides secure storage for up to six (6) handguns and ten (10) single or double stack magazines.
The center foam insert can be removed to reconfigure the case for four (4) handguns with storage space for accessories like ear and eye protection. This multiple-gun case features high-quality closed cell PEF foam construction in the base and soft cushioned foam in the lid for long term durability and protection. The case will also accept 1911 style guns and accommodate guns fitted with trigger locks.
The NANUK 935 protective case comes with a soft grip and ergonomic handle to make it easy to transport. It also features stainless steel hardware and spring- loaded handles to avoid harm when traveling or during shipping. This transport case is also equipped with an automatic pressure release valve and an integrated bezel system to accommodate custom panels without needing to drill holes so the case stays watertight. This MIL-Spec injection molded case is backed by a lifetime warranty. Meets Airline Carry On Regulations.
- Holds: Up To Six (6) Handguns and Ten (10) Single or Double Stack Magazines.
- Strong Polyurethane Wheels
- 2-Stage Retractable Handle
- Powerclaw Latching System
- Crushproof, Dustproof and Shockproof Case
- Waterproof IP67 Rated
- Impact Resistant NK-7 Resin
- Padlockable
- Stackable
- Soft Grip Handle Stay
- Automatic Pressure Release Valve
- Integrated Bezel System
- Integrated Lid Stay
- 100% Stainless Steel Hardware
- Meets Airline Carry-on Regulations (Check with your airline carrier before traveling)
- Military Approved
- Lifetime Warranty
UPC Code:
NK935-GUN – 666365018021
The Nanuk 935 Advantage
Nanuk 935 Case Features
PowerClaw Latching System
Waterproof IP67 Rated
Impact Resistant NK-7 Resin
Padlockable
Stackable
Bezel System
Handle Stay
Lid Stay
Stainless Steel Hardware
Polyurethane Wheels
2-Stage Retractable Handle
SKU | NK935-GUN |
---|---|
Brand | Nanuk Cases |
Lid Depth | 2.1 in. |
Base Depth | 5.4 in. |
Interior (LxWxH) | 20.5 x 11.3 x 7.5 in. |
Exterior (LxWxH) | 22 x 14 x 9 in. |
Weight | 12.71 Lbs. |
Max Buoyancy | 58 Lbs. |
Min Temperature | -20 Degrees F |
Max Temperature | 140 Degrees F |
Wheels | Pull Handle Wheeled |
Handle | Spring Loaded Handles |
Latches | Powerclaw Latching System |
Lockable | Pad-Lockable |
Padlock Holes Diameter | 0.340 in. |
Stackable | Yes |
Water Resistance | Waterproof |
Body Material | Impact Proof Lightweight NK-7 Resin |
Rating | ATA Rated |
Certifications | ATA-300, IP6x, IPx7, MIL-STD-810F, ASTM D-4169 - Drop Test, ASTM D-4169 - Vibration, ASTM D-4169 - Rainfall |
Manufacturer SKU | 935S-080BK-0A0-16708 |
NANUK LIMITED LIFETIME WARRANTY AND DISCLAIMER
Plasticase, Inc. ("Plasticase") warrants that the NANUK case accompanying this document (the "Case") will be free from defects in material and workmanship for the life of the Case, subject to the terms and conditions of this Limited Warranty and Disclaimer (the "Warranty").
Limitation
Limitation of Warranty The Warranty herein applies only to the original customer and is conditional upon the customer giving prompt notice to Plasticase of any discovered defects. Plasticase shall not be responsible for any other defects or damage, including, but not limited to, any defects or damage caused by or resulting from: (a) alterations to the Case by anyone other than Plasticase; (b) accident; (c) damage due to an intentional or negligent act of a third party; (d) abuse or negligence; (e) wear and tear.; (f) mishandling; (g) failure to use the Case in a safe and reasonable manner, or (h) force majeure. If the Case, in the judgment of Plasticase, shows evidence of having been altered, modified or repaired without the authorization of Plasticase, the Warranty herein shall not apply. THE WARRANTY SET FORTH ABOVE IS EXCLUSIVE AND NO OTHER WARRANTY, WHETHER WRITTEN OR ORAL, IS EXPRESSED OR IMPLIED. PLASTICASE SPECIFICALLY DISCLAIMS THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
Liability
Plasticase’s cumulative liability for damages of any kind whatsoever arising out of the use or possession of the Case, regardless of the form of action, whether in contract or tort, including negligence or strict liability, shall be limited to the purchase price of the Case. IN NO EVENT SHALL PLASTICASE BE LIABLE TO THE CUSTOMER OR ANY OTHER PARTY FOR EXEMPLARY, INDIRECT, SPECIAL, INCIDENTAL, CONTINGENT OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR POSSESSION OF THE CASE, INCLUDING THE VALUE OF THE CONTENTS OF THE CASE, WHETHER OR NOT PLASTICASE HAS RECEIVED NOTICE OF THE POSSIBILITY OR CERTAINTY OR SUCH DAMAGES OR LOSSES. THESE LIMITATIONS SHALL APPLY NOTWITHSTANDING ANY FAILURE OF ESSENTIAL PURPOSE OF ANY LIMITED REMEDY.
Repair
Repair or Replacement Plasticase’s obligation under this Warranty is limited, at its sole and exclusive option, to either the repair or replacement of the Case where a defect has been claimed and is determined by Plasticase to be present. Upon inspection by Plasticase, the Case or parts thereof that prove to be defective will be repaired or replaced at no charge, and the Case will be shipped back to the customer by Plasticase.
Returns
The customer must contact Plasticase in the event he or she believes the Case is defective and covered by this Warranty in order to open a warranty claim. Call Plasticase at 1-800-783-6883 between 9:00 a.m. to 5:00 p.m. Eastern Time, Monday through Friday to speak with a customer service representative. In some instances, it may be determined that parts can be easily installed by the customer and Plasticase reserves the right to ship replacement parts directly to the customer for installation. Otherwise, the customer must pay for shipping the Case to Plasticase at 1059 Boulevard des Entreprises Ouest, Terrebonne, QC J6Y 1V2, Canada for inspection. If the Case is defective, as determined solely by Plasticase after an inspection, the shipping costs will be refunded if proof of shipping is provided. No refunds of shipping costs will be made if the Case is not defective.
This warranty is subject to change and can be modified at Plasticase Inc. discretion.
- Nanuk 938 Gun Case for 6 Guns$364.95