Padded Divider Set for Nanuk 975

Padded Divider Set for Nanuk 975 Case

If you require compartmentalized protective organization of your components or equipment, these padded dividers are the right choice. Easily tailored to your needs with repositionable hook and loop fasteners, the padded dividers are designed to easily organize and protect your equipment.

Divider Kit Includes:

Upper Tray Kit:

(1) base
(2) 1/2 inch thick long dividers
(6) 1/4 inch thick short dividers
(1) 1 inch thick convoluted foam pad
(3) retention straps

Lower Tray Kit:

(1) base
(3) 1/2 inch thick long dividers
(15) 1/4 inch thick short dividers
(3) retention straps

PADDED DIVIDER KIT INSTALLATION

Inspect your divider set to ensure that all required parts have been included in the package.
The configuration of the dividers within the divider base is customizable to fit your particular items.
Fold all four sides of the base upwards. Attach the corners of the base sides with the hook and loop fastening system.
After you have decided on your preferred configuration of the dividers begin by installing the longest dividers. To aid with installation, a piece of loose paper can be positioned between the dividers and the base. Once positioned, remove the paper to attach the hook and loop fasteners. Continue by placing the smaller dividers into position.
Once the dividers have been put in place the divider kit can be installed into the case.
Complete the installation by installing the convoluted foam in the top of the case.

Specs