Nanuk-R 915 Eco-Friendly Case with No Foam

Nanuk-R 915 protective case with Empty interior is an eco-friendly case built from recycled resin, delivering waterproof, impact-resistant protection for valuable gear and equipment.
Color
Black
Material
Recycled Resin

Key specifications

Interior
13.8 x 9.3 x 6.2 in.
Exterior
15.8 x 12.1 x 6.8 in.
Lid
2.1 in.
Base
4.1 in.
Weight
4.4 lbs
Wheels
No Wheels

View all specs

Key features

Eco-Friendly Design

Padlockable Security

Secure, Fast Latching

Impenetrable & Indestructible

Water/Dust Sealed

View full description

Certifications

CERTIFICATIONS

ATA-300

MIL-STD-810F/G

IP6X

IPX7

ASTM D-4169

DEF STAN 81-41

Lifetime Warranty
A Lifetime Warranty refers to a guarantee that the case is fully warranted against defects in materials and craftsmanship for the life of the case to the original owner. If your case breaks, we will supply replacement parts, repair the case, or replace your case for as long as you own it. Some conditions apply, please see individual manufacturer’s warranties.
Satisfaction Guaranteed
Satisfaction Guaranteed is a promise that we ensure our customers are satisfied with the quality of the products they purchase from us and that they are free from any defects in materials or workmanship. We do our absolute best to be sure everyone gets satisfactory service and support.
Waterproof
Waterproof means that a case is completely resistant to water and will not allow water to pass through it under specific conditions. Waterproof cases are designed to remain unaffected by water exposure, even when submerged, typically for a certain depth and duration as defined by standards like the IP (Ingress Protection) rating system.

Product information

Details, specifications & reviews

Description

Nanuk-R 915 Eco-Friendly Protective Case with Empty Interior

The Nanuk NK-R915 Hard Shell Case is built to take abuse so your valuable gear doesn’t, the NANUK-R 915 waterproof hard case is impenetrable and indestructible with a shell in recycled resin and its PowerClaw superior latching system.

With NANUK’s exclusive locking and latching system, your case stays shut and secured until you are ready to open it.

The NANUK-R 915 organizes, protects, carries and survives in any condition, especially tough ones.

The NANUK-R 915 is a favorite of photographers, videographers, drone operators/pilots, outdoor enthusiasts, sportsmen, law enforcement officers, first responders, military, hunters, shooting sports enthusiasts, medical professionals, and many more to protect their most valuable gear.

The slim profile, but generous capacity of the NANUK-R 915 case makes it perfect for protecting small laptops, tablets, small cameras, electronics, handguns, small drones, sample kits, medical equipment, compact tools, and equipment of all sorts. Lightweight, rugged and compact, the NANUK-R 915 hard case adapts to every environment.

The NANUK-R 915 protective case comes with a soft grip and ergonomic handle to make it easy to transport.

It also features stainless steel hardware and integrated handle stay to keep the handle out of harm’s way when traveling or during shipping. This transport case is also equipped with an automatic pressure release valve and an integrated bezel system to accommodate custom panels without needing to drill holes so the case stays watertight.

The NANUK 915-R MIL-Spec injection molded case is backed by a lifetime warranty.

  • Interior: Empty
  • MIL-Spec Injection Molded Case
  • Soft Grip, Ergonomic Handle
  • Waterproof, Dustproof and Indestructible
  • Impact Resistant Recycled Resin
  • Automatic Pressure Release Valve
  • 100% Stainless Steel Hardware
  • Integrated Bezel System
  • Integrated Handle Stay
  • PowerClaw Superior Latching System
  • Padlockable
  • Stackable
  • Meets Airline Carry-on Regulations (Check with your airline carrier before traveling)
  • Lifetime Guarantee

NK-R915-BLK - UPC Code: 666365075970 | MPN: 915SR000BK-0A0

Specs
Weight4.400000
ColorBlack
GTIN666365075970
Manufacturer Part Number915SR000BK-0A0
BrandNanuk
Manufacturing ProcessInjection Molded
Interior Dimensions13.8 x 9.3 x 6.2 in.
Interior Volume0.46 cu ft
Exterior Dimensions15.8 x 12.1 x 6.8 in.
Lid Depth2.1 in.
Base Depth4.1 in.
WheelsNo
LatchesPowerclaw Latching System
HandleSoft Grip Comfort Handle
Retractable HandleNo
LockablePad-Lockable
StackableYes
Removable LidNo
Airline Carry OnYes
Airline Check InYes
CertificationsASTM D-4169 DC-18 Drop, ASTM D-4169 DC-18 Rainfall, ASTM D-4169 DC-18 Vibration, ATA-300 Cat 1, DEF STAN 81-41 / STANAG 4280, IP6X Dustproof, IPX7 Waterproof, MIL-STD-810F
IP RatingIP67 Rated
ATA RatedYes
Water ProtectionWaterproof
Max Buoyancy17 Lbs.
Minimum Temperature-20 Degrees F
Maximum Temperature140 Degrees F
Padlock Holes Diameter0.300 in.
Exterior MaterialRecycled Resin
Body MaterialPost-Consumer Recycled Resin
Case Shell MaterialPost-Consumer Recycled Resin
Handle MaterialNK-7 High Impact Polypropylene, TPE
latch_materialNylon 66
Pins Material304 Stainless Steel
Gasket MaterialEPDM
Purge Valve MaterialNylon 66, Gore Membrane, Silicone Washers
Customer Return Policy for This ProductStock Case — Standard 30-Day Returns
Transporting and Shipping Options
Small Package
Small Package Service refers to cases that can ship via UPS, Fedex or USPS and would be charged a standard rate based on the weight. Cases must weigh less than 150 lbs. and meet certain dimensional requirements. Always check the carrier’s small package policy for exact limits.
Checked Baggage
Checked Baggage refers to cases that can be checked in on the airlines that are under 50 lbs. and under 62 in. overall or less would be considered standard size bags that would not incur an oversize fee. Overall dimensions of the case are determined by adding the length, width and height together. Always check your airline’s specific policy, as size and weight limits can vary by carrier and route.
Reviews

Customer Reviews

Write Your Own Review
You're reviewing: Nanuk-R 915 Eco-Friendly Case with No Foam
Your Rating:
loader
Loading...
Product Questions
Customer Questions
No Questions
Press to skip carousel

We found other products you might like!

Pelican 1400 Small Carrying Case with Empty Interior

Pelican Pelican Protector Cases

Pelican 1400 Small Carrying Case with Empty Interior

SKU: 1400NF

Color
Interior
11.81 x 8.87 x 5.18 in.
Exterior
13.37 x 11.62 x 6 in.
Weight
3.97 lbs.
  • Pad-Lockable

Interior Options

$109.95
Pelican iM2100 Small Storm Case with Empty Interior

Pelican Pelican Storm Cases

Pelican iM2100 Small Storm Case with Empty Interior

SKU: iM2100-X0000

Color
Interior
13 x 9.2 x 6 in.
Exterior
14.2 x 11.4 x 6.5 in.
Weight
4.20 lbs.
  • Pad-Lockable

Interior Options

$109.95
iSeries 1309-6 Waterproof Utility Case Empty

SKB SKB iSeries Cases

SKB iSeries 3i 1309-6 Shipping Case

SKU: 3i-1309-6B-E

Color Black
Interior
13.5 x 9.5 x 6.5 in.
Exterior
14.73 x 11.94 x 7.31 in.
Weight
4.60 lbs.
  • Pad-Lockable
$109.99
Seahorse 520 Small Protective Case with Empty interior

Seahorse Seahorse Cases

Seahorse SE520 Small Protective Case with Empty Interior

SKU: SE520

Color
Interior
13.5 x 9.9 x 6 in.
Exterior
14.9 x 12.1 x 6.9 in.
Weight
4.73 lbs.
  • Pad-Lockable

Interior Options

$96.56

Proven in demanding programs

Trusted by teams at government and enterprise organizations

Organizations shown represent customers whose teams have purchased from Specialty Cases.

  • BAE Systems
  • Boeing
  • CACI
  • FEMA
  • Google
  • Idaho National Laboratory
  • Johns Hopkins
  • Lockheed Martin
  • Sacramento County
  • US Department of Defense
  • US Homeland Security

Buy with confidence

What to confirm before ordering

A quick fit-and-logistics check helps prevent delays and keeps your equipment protected.

Confirm usable dimensions

Compare your equipment dimensions with the listed interior dimensions, allowing space for foam, cables, and accessories.

Plan the complete packed weight

Add the case, equipment, foam, and accessories when checking handling requirements or carrier weight limits.

Match protection to transport

Review the product specifications and certifications for the shipping, travel, storage, or field conditions you expect.

Ask before a program purchase

For custom foam, repeat builds, or volume orders, confirm the configuration with our case team before placing the order.

Experience & accountability

Why organizations choose Specialty Cases

Choosing the right protective case involves more than dimensions. We help your team evaluate fit, protection, handling, and shipping requirements to find the right solution.

Protective case specialists since 1989

Decades of experience helping organizations protect equipment during shipping, travel, storage, and deployment.

Application-led guidance

Our team helps match case construction, dimensions, foam, hardware, and handling features to your equipment and transportation needs.

Custom and program support

Get help with custom foam, repeat configurations, bulk orders, and equipment rollouts for IT, AV, industrial, government, and field teams.

Sales and support based in Maryland

Our team is based in Sykesville, Maryland, providing knowledgeable assistance before and after your purchase.