Nanuk 909 8-Knife Small Case
NANUK 909 8-KNIFE CASE is built to hold eight (8) single-blade folding knives. This slim profile knife case is lockable, waterproof, indestructible and built to protect and secure your collection. Perfect for knife organization, protection and transport.
- Pre-Cut Foam Insert for 8 Knives
- Waterproof IP67 Rated
- Powerclaw Latching System
- Removable Lid
- Padlockable
- Soft Grip Handle Stay
- Integrated Lid Stay
- Molded-in Bezel System
- Meets Airline Carry-on Regulations
- ATA Rated
- MIL-SPEC Certified
- Impact Resistant NK-7 Resin
- Automatic Pressure Release Valve
- Stackable
- 100% Stainless Steel Hardware
- Dustproof and Shockproof
- ATA-300/IP6x/IPx7/MIL-STD-810F/ASTM D-4169
- Lifetime Warranty
Interior Dimensions: 11.44 x 7 x 3.68 in.
Exterior Dimensions: 12.64 x 9 x 4.38 in.
Lid Dimensions: 1.31 in.
Base Dimensions: 2.37 in.
Weight: 2.16 Lbs.
Wheels: No Wheels
UPC Code: 666365025074
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
Nanuk 909-8KNI Small Hard Shell Protective Case for 8 Knives
The Nanuk 909 8-Knife Case has two reinforced metal eyelets which accommodate TSA-accepted case locks for additional security. Compatible with Spyderco, Kershaw, Benchmade, Cold Steel, Zero Tolerance, CRKT, Buck, Gerber, SOG and many other knife brands.
Built to hold eight (8) single-blade folding knives, the NANUK 909 8-Knife Case is indestructible and built to protect and secure your collection. The protective foam interior is pre-cut to hold up to 8 knives as long as 5 5/8 in. (closed) and 3/4 in. wide including pocket clip. Keep your knives dust-free, dry and out of harm’s way with the compact NANUK 909.
The NANUK 909 8-knife protective case comes with a soft grip and ergonomic handle to make it easy to transport. It also features stainless steel hardware and integrated handle stay to keep the handle out of harm when traveling or during shipping. This transport case is also equipped with an automatic pressure release valve to keep it airtight.
The slim profile makes it the perfect case for knife organization, protection and transport. Like all NANUK cases, the 909 is waterproof IP-67 rated, built with our MIL-Spec indestructible NK-7 Resin, and equipped with our PowerClaw superior latching system. Our lifetime warranty is your assurance that the NANUK 909 8-Knife Case protects your knives like no other compact case can. This MIL-Spec injection molded case is backed by a lifetime warranty.
The 909 small case is available in a variety of colors and is offered with or without foam layered interior. The case interior is 11.44 x 7 x 3.68 inches and is ideal to store, protect, and transport smaller items. Meets Airline Carry-on Regulations.
- Powerclaw Superior Latching System
- Crushproof, Dustproof and Shockproof Case
- Waterproof IP67 Rated
- Dustproof (IP6X)
- MIL-SPEC Certified
- Impact Resistant NK-7 Resin
- Lightweight
- Padlockable
- Stackable
- Soft Grip Handle
- Integrated Lid Stay
- Removeable Lid
- Automatic Pressure Release Valve
- 100% Stainless Steel Hardware
- Meets Airline Carry-on Regulations (Check with your airline carrier before traveling)
- Lifetime Guarantee
UPC Code:
NK909-8KNI – 666365025074
The Nanuk 909-8KNI Advantage

Nanuk 909-8KNI Case Features

PowerClaw Latching System

Waterproof IP67 Rated

Impact Resistant NK-7 Resin

Padlockable

Stackable

Handle Stay

Lid Stay

Stainless Steel Hardware
| SKU | NK909-8KNI |
|---|---|
| Brand | Nanuk Cases |
| Interior (LxWxH) | 11.44 x 7 x 3.68 in. |
| Interior Cu. Volume | 0.18 cu ft |
| Exterior (LxWxH) | 12.64 x 9 x 4.38 in. |
| Weight | 2.6 Lbs. |
| Color | Black |
| Available Colors | Black, Blue, Graphite, Olive, Orange, Red, Tan, Yellow |
| Lid Depth | 1.31 in. |
| Base Depth | 2.37 in. |
| Max Temperature | 140 Degrees F |
| Min Temperature | -20 Degrees F |
| Max Buoyancy | 10 Lbs. |
| Wheels | No Wheels |
| Handle | Soft Grip Comfort Handle |
| Retractable Handle | No |
| Latches | Powerclaw Latching System |
| Removable Lid | No |
| Lockable | Pad-Lockable |
| Padlock Holes Diameter | 0.300 in. |
| Stackable | Yes |
| Body Material | Impact Proof Lightweight NK-7 Resin |
| Case Shell Material | NK-7 High Impact Polypropylene |
| Latch Material | Nylon 66 |
| Handle Material | NK-7 High Impact Polypropylene, TPE |
| Pins Material | 304 Stainless Steel |
| Gasket Material | EPDM |
| Purge Value Material | Nylon 66, Gore Membrane, Silicone Washers |
| Water Resistance | Waterproof |
| Airline Check In | Yes |
| Airline Carry On | Yes |
| Manufacturer SKU | 909S-080BK-0A0-19327 |
| Transporting and Shipping Options |
No interior options available for this product.
No documents available for this product.
No videos available for this product.
NANUK LIMITED LIFETIME WARRANTY AND DISCLAIMER
Plasticase, Inc. ("Plasticase") warrants that the NANUK case accompanying this document (the "Case") will be free from defects in material and workmanship for the life of the Case, subject to the terms and conditions of this Limited Warranty and Disclaimer (the "Warranty").
Limitation
Limitation of Warranty The Warranty herein applies only to the original customer and is conditional upon the customer giving prompt notice to Plasticase of any discovered defects. Plasticase shall not be responsible for any other defects or damage, including, but not limited to, any defects or damage caused by or resulting from: (a) alterations to the Case by anyone other than Plasticase; (b) accident; (c) damage due to an intentional or negligent act of a third party; (d) abuse or negligence; (e) wear and tear.; (f) mishandling; (g) failure to use the Case in a safe and reasonable manner, or (h) force majeure. If the Case, in the judgment of Plasticase, shows evidence of having been altered, modified or repaired without the authorization of Plasticase, the Warranty herein shall not apply. THE WARRANTY SET FORTH ABOVE IS EXCLUSIVE AND NO OTHER WARRANTY, WHETHER WRITTEN OR ORAL, IS EXPRESSED OR IMPLIED. PLASTICASE SPECIFICALLY DISCLAIMS THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
Liability
Plasticase’s cumulative liability for damages of any kind whatsoever arising out of the use or possession of the Case, regardless of the form of action, whether in contract or tort, including negligence or strict liability, shall be limited to the purchase price of the Case. IN NO EVENT SHALL PLASTICASE BE LIABLE TO THE CUSTOMER OR ANY OTHER PARTY FOR EXEMPLARY, INDIRECT, SPECIAL, INCIDENTAL, CONTINGENT OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR POSSESSION OF THE CASE, INCLUDING THE VALUE OF THE CONTENTS OF THE CASE, WHETHER OR NOT PLASTICASE HAS RECEIVED NOTICE OF THE POSSIBILITY OR CERTAINTY OR SUCH DAMAGES OR LOSSES. THESE LIMITATIONS SHALL APPLY NOTWITHSTANDING ANY FAILURE OF ESSENTIAL PURPOSE OF ANY LIMITED REMEDY.
Repair
Repair or Replacement Plasticase’s obligation under this Warranty is limited, at its sole and exclusive option, to either the repair or replacement of the Case where a defect has been claimed and is determined by Plasticase to be present. Upon inspection by Plasticase, the Case or parts thereof that prove to be defective will be repaired or replaced at no charge, and the Case will be shipped back to the customer by Plasticase.
Returns
The customer must contact Plasticase in the event he or she believes the Case is defective and covered by this Warranty in order to open a warranty claim. Call Plasticase at 1-800-783-6883 between 9:00 a.m. to 5:00 p.m. Eastern Time, Monday through Friday to speak with a customer service representative. In some instances, it may be determined that parts can be easily installed by the customer and Plasticase reserves the right to ship replacement parts directly to the customer for installation. Otherwise, the customer must pay for shipping the Case to Plasticase at 1059 Boulevard des Entreprises Ouest, Terrebonne, QC J6Y 1V2, Canada for inspection. If the Case is defective, as determined solely by Plasticase after an inspection, the shipping costs will be refunded if proof of shipping is provided. No refunds of shipping costs will be made if the Case is not defective.
This warranty is subject to change and can be modified at Plasticase Inc. discretion.































