Nanuk 980 Long Case with Padded Dividers
A Lifetime Warranty refers to a guarantee that the case is fully warranted against defects in materials and craftsmanship for the life of the case to the original owner. If your case breaks, we will supply replacement parts, repair the case, or replace your case for as long as you own it. Some conditions apply, please see individual manufacturer’s warranties.
Satisfaction Guaranteed is a promise that we ensure our customers are satisfied with the quality of the products they purchase from us and that they are free from any defects in materials or workmanship. We do our absolute best to be sure everyone gets satisfactory service and support.
Waterproof means that a case is completely resistant to water and will not allow water to pass through it under specific conditions. Waterproof cases are designed to remain unaffected by water exposure, even when submerged, typically for a certain depth and duration as defined by standards like the IP (Ingress Protection) rating system.Nanuk 980 Long Case with Padded Dividers Interior is built strong and secures your equipment on the go. Adjustable padded dividers provide compartmentalized protective organization.
- Padded Dividers Interior
- Oversize Carry Handles
- Waterproof IP67 Rated
- Powerclaw Latching System
- Soft Grip Handle Stay
- Integrated Lid Stay
- Molded-in Bezel System
- Automatic Pressure Release Valve
- ATA Rated
- Padlockable
- Top and Bottom Panel Mount
- Impact Resistant NK-7 Resin
- Stackable
- Dustproof and Shockproof
- ATA-300/IP6x/IPx7/MIL-STD-810F/ASTM D-4169
- Lifetime Warranty
Interior Dimensions: 26.9 x 13.3 x 6.2 in.
Exterior Dimensions: 29.9 x 16.2 x 7.3 in.
Lid Dimensions: 1.5 in.
Base Dimensions: 4.5 in.
Weight: 14.8 Lbs.
Wheels: No Wheels
UPC Code: 666365054548
Options:
Dividers Dividers and Lid Organizer Empty Foam
Nanuk 980 Long Hard Shell Protective Case with Padded Dividers Interior
The Nanuk 980D Long Case is a mid-size, long case that’s versatile enough to protect not-so-long gear, lots of smaller gear, or both. Not as lengthy as our Long Cases, but twice as long as some our Medium Cases, it’s built to protect valuable equipment in tough conditions. The NANUK 980 is designed with deeper ribs that give it better stability for stacking, storage, transport and quick access. At the same time, it’s just the right size and light enough for personal carry. The case is waterproof, crushproof and shockproof.
The case interior has adjustable padded dividers. If you require compartmentalized protective organization of your components or equipment, these padded dividers are the right choice. Easily tailored to your needs with repositionable hook and loop fasteners, the padded dividers are designed to easily organize and protect your equipment.
This ultra-durable case has many features including an impenetrable tough resin shell and four legendary PowerClaw latches. An integrated lid stay prevents the lid from closing while you are accessing your equipment. The 980 case has a molded-in bezel system, top and bottom panel mounts, an automatic pressure valve, stainless steel hardware and two padlockable hasps molded directly into case. Grooves on the front interlock with built-in feet at the base when stacking multiple cases of the same size.
The Nanuk 980 case has been engineered and manufactured to stringent military specifications to surpass the needs of the most demanding users. These virtually indestructible, watertight cases offer the ultimate grade of protection and performance. The 980 large case is available in a variety of colors and is offered with empty, cubed foam, padded dividers or dividers and lid organizer interior. The case interior is 26.9 x 13.3 x 6.2 inches and is ideal to store, protect, and transport larger items. Backed by the Nanuk Lifetime Guarantee.
- Interior: Padded Dividers
- Oversized Spring-Loaded Carry Handle
- Powerclaw Latching System
- Crushproof, Dustproof and Shockproof Case
- Waterproof IP67 Rated
- Impact Resistant NK-7 Resin
- Reinforced Metal Padlock Holes
- Padlockable
- Stackable
- Molded-in Bezel System
- Top and Bottom Panel Mount
- Soft Grip Handle Stay
- Automatic Pressure Release Valve
- Integrated Lid Stay
- Removable Lid
- 100% Stainless Steel Hardware
- Lifetime Guarantee
UPC Code:
NK980D – 666365054548
The Nanuk 980 Advantage
Nanuk 980 Case Features
PowerClaw Latching System
Waterproof IP67 Rated
Impact Resistant NK-7 Resin
Padlockable
Stackable
Bezel System
Handle Stay
Lid Stay
Stainless Steel Hardware
| SKU | NK980D |
|---|---|
| Brand | Nanuk Cases |
| Interior Options | Padded Dividers |
| Interior (LxWxH) | 26.9 x 13.3 x 6.2 in. |
| Exterior (LxWxH) | 29.9 x 16.2 x 7.3 in. |
| Weight | 14.8 Lbs. |
| Color | Black |
| Available Colors | Black, Olive |
| Lid Depth | 1.5 in. |
| Base Depth | 4.6 in. |
| Max Temperature | 140 Degrees F |
| Min Temperature | -20 Degrees F |
| Max Buoyancy | 95.7 Lbs. |
| Wheels | No Wheels |
| Handle | Spring Loaded Top Handle |
| Retractable Handle | No |
| Latches | Powerclaw Latching System |
| Lockable | Pad-Lockable |
| Padlock Holes Diameter | 0.340 in. |
| Stackable | Yes |
| Body Material | Impact Proof Lightweight NK-7 Resin |
| Case Shell Material | NK-7 High Impact Polypropylene |
| Latch Material | Nylon 66 |
| Handle Material | NK-7 High Impact Polypropylene, TPE |
| Pins Material | 304 Stainless Steel |
| Gasket Material | EPDM |
| Purge Value Material | Nylon 66, Gore Membrane, Silicone Washers |
| Water Resistance | Waterproof |
| Airline Check In | Yes |
| Airline Carry On | No |
| Rating | ATA Rated |
| Certifications | ATA-300, Def Stan 81-41, IP6x, IPx7, MIL-C-4150J, MIL-STD 810G |
| Manufacturer SKU | 980S-020BK-0A0 |
| Transporting and Shipping Options |  Small Package Service refers to cases that can ship via UPS, Fedex or USPS and would be charged a standard rate based on the weight. Cases must weigh less than 150 lbs. and meet certain dimensional requirements. Always check the carrier’s small package policy for exact limits. Checked Baggage refers to cases that can be checked in on the airlines that are under 50 lbs. and 62 in. overall or less and would be considered standard size bags that would not incur an oversize fee. Overall dimensions of the case are determined by adding the length, width and height together. Always check your airline’s specific policy, as size and weight limits can vary by carrier and route. |
Empty
NK980 – No Foam Interior.
Pick N Pluck Foam
NK980F – Case is filled with layers of pre-scored charcoal foam. It is the easiest, fastest method for providing a cut-out for individual items. Best for shipping same items repeatedly. Also known as cubed or diced foam.
Padded Dividers
NK980D – Compartmentalized protective organization of your components or equipment. Easily tailored to your needs with repositionable hook and loop fasteners, our padded dividers are designed to easily organize and protect your equipment.
Padded Dividers and Lid Organizer
NK980DLO – Case allows for compartmentalized protective organization of your components or equipment. Easily tailored to your needs with repositionable hook and loop fasteners, our padded dividers are designed to easily organize and protect your equipment. The lid organizer includes a set of mounting screws for easy, stress-free installation. Features include five zippered, transparent and anti-tear compartments for lots of storage.
Nanuk 980 Product DatasheetNo warranty information available for this product.
WHAT OUR CUSTOMERS ARE SAYING:
"Exceptional Quality and Service"
We've been sourcing hard cases and multi-laptop transport cases for our IT deployment teams, and this company has exceeded expectations. The quality is unmatched—durable, secure, and clearly made for professionals. Their customer service team is responsive, knowledgeable, and genuinely committed to helping. Highly recommend for any company needing a quality shipping case.
- Procurement Manager, Federal Contractor
"The Only Case Supplier We Trust"
We use their cases for secure field deployments, and they hold up to the toughest environments. Our reps always get quick answers and real solutions from their support team. Great partner for anyone needing rugged, high-quality shipping and transport options.
- IT Director, Defense Contractor
"Built for Professionals - Built to Last"
We ordered multiple cases to secure sensitive equipment and laptops. Not only did they arrive quickly, but the quality was outstanding. Custom foam inserts were a game-changer for our workflow. Cases came with a lifetime warranty. And any time we’ve had a question, their support team handled it fast and professionally.
- Facilities Manager, National Utility Company
"Top-Tier Cases and Even Better Support"
We needed laptop transport cases that could meet strict government transport standards. These cases were spot-on—secure, organized, and travel-ready. I was especially impressed by how proactive and helpful the customer support was. Their team helped us customize our order, and the process was smooth from start to finish. A great experience all around. Our organization will absolutely reorder.
- Logistics Coordinator, Municipal IT Tech Department
WHY CHOOSE SPECIALTY CASES?
SKB H5020W Rail Pack Utility Case w/ Wheels
Review by Britt R
Pelican V800 Vault Long Double Rifle Case with Wheels
Review by Tim
TM-S2918 Multiple Laptop Case For 10 Laptops | Fits Most 17 to 18 in. Laptops
Review by Brian Schmoyer
28 in. Single / Dual Flat Screen Shipping Case
Review by Rodney
SKB iSeries 3i 5014-6 Wheeled Shipping Case w/ Empty Interior
Review by Kelley
Multiple iPad Carrying Case for 12 Tablets
Review by Amie R.
Secure Checkout
Typically Ships within 2 - 3 Days
No Restocking Fee
