Nanuk 988F Long Wheeled Case with Solid Layers of Foam Interior features (2) large and strong Polyurethane wheels, (3) soft grip oversize team carry handles, 2 lower corner caps, (6) Powerclaw latches and (2) automatic pressure equalization valves. The multi-layered set of customizable foam inserts includes foam layers that can be trimmed to accommodate the contents of the case. This solution is ideal if you are seeking a quick and easy way to protect and organize your items. This waterproof case is backed by a Lifetime Guarantee. In Stock, Ready To Ship!
Interior Dimensions: 41.7 x 13.6 x 12.5 in.
Exterior Dimensions: 44.9 x 16.3 x 13.6 in.
Base & Lid Dimensions: Base: 9.8 in. | Lid: 2.8 in.
Weight: 25.9 Lbs.
Wheels: Inline Edge Wheels
UPC Code: 666365039354
Nanuk 988 Long Hard Shell Protective Case with Wheels and Solid Layers of Foam Interior
The Nanuk 988F Long Wheeled Case Long, deep, rugged, and tough, NANUK 988F will protect and mobilize loads of gear with room to spare. It's built to go fast with stainless steel ball-bearing wheels and three spring-loaded handles that make it the perfect premium waterproof protective case to go anywhere.
This case has Solid Foam layered interior made of high quality polyurethane foam, this solid layer of foam can be trimmed to accommodate the contents of the case. This solution is ideal if you are seeking a quick and easy way to protect and organize your items.
Waterproof and dustproof, it's built so it can be thrown in the back of a pick-up, stacked on a pallet, taken to the set or the range with confidence.
Designed with a long and deep interior of 41.7 x 13.6 x 12.5 inches it fits pro photo and video equipment, lighting equipment, tripods, firearms, hunting gear, telescopes, power tools, chainsaws, military / police gear, turnout gear, oxygen tanks, sports equipment, measurement equipment, industrial tools, trunk bed / utility box, bunker gear, rifles, and much more.
The 988F is equipped with three (3) ultra-strong handles and two (2) strong polyurethane large wheels with stainless steel ball bearings is for any terrain. If your needs change, the wheel assemblies on the 988F are removable and can be replaced with custom corner caps. Like all NANUK waterproof protective cases, the 988F is made of NK7 resin and equipped with six (6) legendary PowerClaw latches. The 988F is indestructible and will never open accidentally. Molded with deeper ribs and taller feet, it's highly stackable.
The 988F comes with a lifetime warranty, your assurance that Nanuk builds cases to protect your most valuable gear for life.
The indestructible, MIL-Spec 988F case is equipped with integrated lid stays molded into the hinge keeping the case lid open when you need it to stay open which means no more pinched fingers. The case includes two spring-loaded handles and rolls smoothly with its ultra-durable polyurethane wheels making transporting your equipment a breeze.
- Interior: Solid Layers of Foam
- 3 Soft Grip Strong Oversize Team Carry Handles
- 2 Large and Strong Polyurethane Wheels
- 6 Powerclaw Latches
- 2 Automatic Pressure Equalization Valve
- 2 Lower Corner Caps
- Stackable - Deeper Ribs and Taller Feet
- Crushproof, Dustproof and Shockproof Case
- Waterproof IP67 Rated
- Impact Resistant NK-7 Resin
- Reinforced Metal Padlock Holes
- Padlockable
- Integrated Lid Stays
- 100% Stainless Steel Hardware
- Lifetime Guarantee
UPC Code:
NK988F – 666365039354
The Nanuk 988 Advantage
Nanuk 988 Case Features
Polyurethane Wheels
Waterproof IP67 Rated
PowerClaw Latching System
Impact Resistant NK-7 Resin
Stackable
Padlockable
Handle Stay
Stainless Steel Hardware
Tie Down Eyelets
Integrated Lid Stay
SKU | NK988F |
---|---|
Brand | Nanuk Cases |
Interior Options | Solid Layers of Foam |
Interior (LxWxH) | 41.7 x 13.6 x 12.5 in. |
Exterior (LxWxH) | 44.9 x 16.3 x 13.6 in. |
Weight | 25.9 Lbs. |
Color | Black |
Lid Depth | 2.8 in. |
Base Depth | 9.8 in. |
Max Temperature | 140 Degrees F |
Min Temperature | -20 Degrees F |
Max Buoyancy | 284 Lbs. |
Wheels | Inline Edge Wheels |
Handle | Oversize Team-Carry Handles |
Retractable Handle | No |
Latches | Powerclaw Latching System |
Lockable | Pad-Lockable |
Padlock Holes Diameter | 0.340 in. |
Stackable | Yes |
Body Material | Impact Proof Lightweight NK-7 Resin |
Case Shell Material | NK-7 High Impact Polypropylene |
Latch Material | Nylon 66 |
Handle Material | NK-7 High Impact Polypropylene, TPE |
Wheels Material | Polyurethane | Polycarbonate |
Pins Material | 304 Stainless Steel |
Gasket Material | EPDM |
Purge Value Material | Nylon 66, Gore Membrane, Silicone Washers |
Water Resistance | Waterproof |
Airline Check In | Yes |
Airline Carry On | No |
TSA Compliant | No |
Rating | ATA Rated |
Certifications | ATA-300, IP6x, IPx7, MIL-STD-810F, ASTM D-4169 - Drop Test, ASTM D-4169 - Vibration, ASTM D-4169 - Rainfall |
Manufacturer SKU | 988S-010BK-0A0 |
Pick N Pluck Foam
NK988F – Case is filled with layers of pre-scored charcoal foam. It is the easiest, fastest method for providing a cut-out for individual items. Best for shipping same items repeatedly. Also known as cubed or diced foam.NANUK LIMITED LIFETIME WARRANTY AND DISCLAIMER
Plasticase, Inc. ("Plasticase") warrants that the NANUK case accompanying this document (the "Case") will be free from defects in material and workmanship for the life of the Case, subject to the terms and conditions of this Limited Warranty and Disclaimer (the "Warranty").
Limitation
Limitation of Warranty The Warranty herein applies only to the original customer and is conditional upon the customer giving prompt notice to Plasticase of any discovered defects. Plasticase shall not be responsible for any other defects or damage, including, but not limited to, any defects or damage caused by or resulting from: (a) alterations to the Case by anyone other than Plasticase; (b) accident; (c) damage due to an intentional or negligent act of a third party; (d) abuse or negligence; (e) wear and tear.; (f) mishandling; (g) failure to use the Case in a safe and reasonable manner, or (h) force majeure. If the Case, in the judgment of Plasticase, shows evidence of having been altered, modified or repaired without the authorization of Plasticase, the Warranty herein shall not apply. THE WARRANTY SET FORTH ABOVE IS EXCLUSIVE AND NO OTHER WARRANTY, WHETHER WRITTEN OR ORAL, IS EXPRESSED OR IMPLIED. PLASTICASE SPECIFICALLY DISCLAIMS THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
Liability
Plasticase’s cumulative liability for damages of any kind whatsoever arising out of the use or possession of the Case, regardless of the form of action, whether in contract or tort, including negligence or strict liability, shall be limited to the purchase price of the Case. IN NO EVENT SHALL PLASTICASE BE LIABLE TO THE CUSTOMER OR ANY OTHER PARTY FOR EXEMPLARY, INDIRECT, SPECIAL, INCIDENTAL, CONTINGENT OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR POSSESSION OF THE CASE, INCLUDING THE VALUE OF THE CONTENTS OF THE CASE, WHETHER OR NOT PLASTICASE HAS RECEIVED NOTICE OF THE POSSIBILITY OR CERTAINTY OR SUCH DAMAGES OR LOSSES. THESE LIMITATIONS SHALL APPLY NOTWITHSTANDING ANY FAILURE OF ESSENTIAL PURPOSE OF ANY LIMITED REMEDY.
Repair
Repair or Replacement Plasticase’s obligation under this Warranty is limited, at its sole and exclusive option, to either the repair or replacement of the Case where a defect has been claimed and is determined by Plasticase to be present. Upon inspection by Plasticase, the Case or parts thereof that prove to be defective will be repaired or replaced at no charge, and the Case will be shipped back to the customer by Plasticase.
Returns
The customer must contact Plasticase in the event he or she believes the Case is defective and covered by this Warranty in order to open a warranty claim. Call Plasticase at 1-800-783-6883 between 9:00 a.m. to 5:00 p.m. Eastern Time, Monday through Friday to speak with a customer service representative. In some instances, it may be determined that parts can be easily installed by the customer and Plasticase reserves the right to ship replacement parts directly to the customer for installation. Otherwise, the customer must pay for shipping the Case to Plasticase at 1059 Boulevard des Entreprises Ouest, Terrebonne, QC J6Y 1V2, Canada for inspection. If the Case is defective, as determined solely by Plasticase after an inspection, the shipping costs will be refunded if proof of shipping is provided. No refunds of shipping costs will be made if the Case is not defective.
This warranty is subject to change and can be modified at Plasticase Inc. discretion.