Pelican 1550TP Medium Shipping Case with TrekPak Divider System
Made in USA refers to a product that is virtually completely made in the United States of America. Any components not produced in the United States is negligible.
A Limited Lifetime Warranty combines aspects of both limited and lifetime warranties. It offers product protection for as long as the original purchaser owns the product, but with specific limitations and exclusions.
Satisfaction Guaranteed is a promise that we ensure our customers are satisfied with the quality of the products they purchase from us and that they are free from any defects in materials or workmanship. We do our absolute best to be sure everyone gets satisfactory service and support.
Watertight means that a case is sealed so that water cannot enter under normal conditions, typically when subjected to water pressure or splashing. Watertight usually refers to being sealed against leaks rather than being fully submersible.Pelican 1550TP Protector Shipping Case with TrekPak Divider System Interior. Hard Shell Case with unbreakable crushproof exterior protects your equipment. TrekPak system uses pre-installed wall sections, divider panels, locking pins and a cutting tool. Includes bottom foam pad and convoluted lid foam.
- TrekPak Divider System Interior
- Double Throw Latches
- Fold Down Handle
- Watertight, Crushproof, and Dustproof
- O-Ring Seal
- Automatic Pressure Equalization Valve
- Stackable
- Padlockable
- ATA Rated
- Military Grade Protection
- Open Cell Core with Solid Wall Design
- Injection Molded Exterior
- Stainless Steel Hardware
- Def Stan 81-41/IP67/STANAG 4280/MIL STD 810G
- Guaranteed for Life
- USA Made
Interior Dimensions: 18.63 x 14.18 x 7.72 in.
Exterior Dimensions: 20.66 x 17.2 x 8.4 in.
Lid Dimensions: 1.75 in.
Base Dimensions: 5.87 in.
Weight: 8.29 Lbs.
Wheels: No Wheels
UPC Code: 019428137441
Interior Options:
TrekPak Divider System Pick N Pluck Foam Empty Padded Dividers
Pelican 1550 Medium Protector Case with TrekPak Divider System Interior
Pelican 1550 Medium sized protector cases are hands down the toughest protection you can get for your valuable items. You’ll find the industry’s largest airline carry-on case here. Pelican waterproof medium cases will protect your cameras and accessories, laptops, and other equipment against water, dust and impact. This rock solid protector case is injection molded and built to last a lifetime.
The TrekPak™ system uses pre-installed wall sections, divider panels, locking pins and a fool-proof cutting tool (included). Just lay your gear in the case, measure and cut the divider sections and lock them in place with the steel U-pins. We include extra divider material so you can change your mind, plus divider panels are also available separately so you can reconfigure your dividers anytime. Available in black cases only.
TrekPak insert with two perimeter pieces, two 13 in. divider strips, two 23 in. divider strips, cutter tool, 20 pins with 20 red pull tabs, plus a top and bottom foam piece.
- Interior: TrekPak Divider System
- 1550 Medium Shipping Case has inside dimensions 18.63 x 14.18 x 7.72 in.
- Watertight, Crushproof, and Dust Proof
- Pad lockable with stainless steel protected hasps
- Injection molded ultra-high impact structural copolymer exterior
- Easy open double throw latches
- Comfortable rubber over-molded handle
- Automatic Pressure Equalization Valve – balances interior pressure, keeps water out
- O-ring seal
- Open cell core with solid wall design – strong, light weight
- Stainless steel hardware
- Unbreakable crushproof exterior
- Lifetime Guarantee
- Proudly Made in the USA
UPC Code:
1550TP – 019428137441
PROTECT WHAT MATTERS WITH MILITARY GRADE PROTECTION
No matter the job, the Pelican Protector Case is the standard in offering your equipment the protection it needs and deserves.
SOLID CONSTRUCTION: The Pelican™ Protector Case™ uses an open cell core and solid wall construction, which is actually stronger and lighter than a solid core wall. Travel light with heavy protection.
DOUBLE-THROW LATCHES: Double-Throw latches are smarter and easier to open: it’s the classic ‘C’ clamp design with a secondary movement that works like a pry bar to start the release and offers plenty of leverage to open with a light pull.
WATERTIGHT: The secret is the tongue-and-groove fit with a polymer o-ring acting as a waterproof seal. Also, our Automatic Pressure Equalization Valve releases built-up air pressure while keeping water molecules out, resulting in a watertight case that is easy to open.
TESTED: The Pelican Protector Case design is the result of multiple generations of refinement. This evolution is proven through submergence and other lab tests.
EASY RIDING: Stainless steel ball bearing wheels (on select cases) last longer and ride smoother. The nylon hub adjacent to the stainless steel resists heat resulting in less wear and tear on the polyurethane tire.
| SKU | 1550TP |
|---|---|
| Brand | Pelican Cases |
| Interior Options | Trekpak Divider System |
| Interior (LxWxH) | 18.63 x 14.18 x 7.72 in. |
| Exterior (LxWxH) | 20.66 x 17.2 x 8.4 in. |
| Weight | 11.9 Lbs. |
| Color | Black |
| Lid Depth | 1.75 in. |
| Base Depth | 5.87 in. |
| Max Temperature | 210 Degrees F |
| Min Temperature | -40 Degrees F |
| Max Buoyancy | 69.89 Lbs. |
| Wheels | No Wheels |
| Handle | Rubber Overmolded Handles |
| Latches | Double-Throw Latches |
| Removable Lid | No |
| Lockable | Pad-Lockable |
| Stackable | Yes |
| Body Material | Polypropylene |
| Latch Material | ABS |
| O-Ring Material | Polymer |
| Pins Material | Stainless Steel |
| Foam Material | 1.3 lb Polyurethane |
| Purge Body Material | ABS |
| Purge Vent Material | 3 Micron Hydrophobic Non-Woven |
| Purge O-Ring Material | 70 Shore Nitrile |
| Water Resistance | Watertight |
| Rating | ATA Rated |
| Certifications | ATA-300, Def Stan 81-41, IP67, MIL-C-4150J, STANAG 4280 |
| Transporting and Shipping Options |  Small Package Service refers to cases that can ship via UPS, Fedex or USPS and would be charged a standard rate based on the weight. Cases must weigh less than 150 lbs. and meet certain dimensional requirements. Always check the carrier’s small package policy for exact limits. Checked Baggage refers to cases that can be checked in on the airlines that are under 50 lbs. and 62 in. overall or less and would be considered standard size bags that would not incur an oversize fee. Overall dimensions of the case are determined by adding the length, width and height together. Always check your airline’s specific policy, as size and weight limits can vary by carrier and route. |
Empty
1550NF – No Foam Interior.
Pick N Pluck Foam
1550 – Pelican™ Protector cases have been designed to protect equipment of all kinds, no matter the size or shape. The Pick N Pluck™ Foam is shock-absorbent, pre-scored Foam in tiny cubes. The item is placed on the foam, outlined with chalk, and then the cubes around the item are removed to form a secure, protective cocoon.FOAM LAYERS: Layer 1 (Lid): 1.75 in. Convolute / Layer 2 (Base): 0.75 in. Pad / Layer 3 (Base): 2.5 in. Pick N Pluck / Layer 4 (Base): 2.5 in. Pick N Pluck.
Padded Dividers
1554 – Durable nylon and foam dividers are extremely versatile. The compartments are connected with Velcro so you can easily change the configuration over again. Full Sewn Tub with Felt Exterior. Velcro™ Compatible Nylex™ Interior. Elastic Hold Down Straps.Includes a 20-piece padded divider set consisting of one tray, two long, two medium and 15 short padded and flexible dividers.
TrekPak Divider System
1550TP – The TrekPak™ system uses pre-installed wall sections, divider panels, locking pins and a fool-proof cutting tool (included). Just lay your gear in the case, measure and cut the divider sections and lock them in place with the steel U-pins. We include extra divider material so you can change your mind, plus divider panels are also available separately so you can reconfigure your dividers anytime. Available in black cases only.TrekPak insert with two perimeter pieces, two 13 in. divider strips, two 23 in. divider strips, cutter tool, 20 pins with 20 red pull tabs, plus a top and bottom foam piece.
Pelican 1550 Product DatasheetPELICAN LIMITED LIFETIME GUARANTEE OF EXCELLENCE
Pelican Products, Inc. guarantees its products for a lifetime against breakage or defects in workmanship. Pelican™ injection molded cases are guaranteed to be watertight to a depth of 3.3 feet (1 meter) for 30 minutes (IP 67) if properly closed with undamaged o-ring in place unless otherwise stated. To the extent permitted by law, Pelican’s liability is limited to the case and not its contents or foam. All warranty claims of any nature are barred if the container has been altered, damaged or in any way physically changed, or subjected to abuse, misuse, negligence or accident. For complete warranty details, see http://www.pelican.com/warranty or call Pelican at 800-473-5422. Lifetime Guarantee does not cover Roto Molded cases, RALS products, fabric portion of backpacks or smartphone cover accessories.
TRUSTED BY THE U.S. GOVERNMENT & FORTUNE 500 COMPANIES:
WHAT OUR CUSTOMERS ARE SAYING:
"Exceptional Quality and Service"
We've been sourcing hard cases and multi-laptop transport cases for our IT deployment teams, and this company has exceeded expectations. The quality is unmatched—durable, secure, and clearly made for professionals. Their customer service team is responsive, knowledgeable, and genuinely committed to helping. Highly recommend for any company needing a quality shipping case.
- Procurement Manager, Federal Contractor
"The Only Case Supplier We Trust"
We use their cases for secure field deployments, and they hold up to the toughest environments. Our reps always get quick answers and real solutions from their support team. Great partner for anyone needing rugged, high-quality shipping and transport options.
- IT Director, Defense Contractor
"Built for Professionals - Built to Last"
We ordered multiple cases to secure sensitive equipment and laptops. Not only did they arrive quickly, but the quality was outstanding. Custom foam inserts were a game-changer for our workflow. Cases came with a lifetime warranty. And any time we’ve had a question, their support team handled it fast and professionally.
- Facilities Manager, National Utility Company
"Top-Tier Cases and Even Better Support"
We needed laptop transport cases that could meet strict government transport standards. These cases were spot-on—secure, organized, and travel-ready. I was especially impressed by how proactive and helpful the customer support was. Their team helped us customize our order, and the process was smooth from start to finish. A great experience all around. Our organization will absolutely reorder.
- Logistics Coordinator, Municipal IT Tech Department
WHY CHOOSE SPECIALTY CASES?
SKB iSeries 3i 5014-6 Wheeled Shipping Case w/ Empty Interior
Review by Kelley
TM-S2918 Multiple Laptop Case For 10 Laptops | Fits Most 17 to 18 in. Laptops
Review by Brian Schmoyer
EX-1637 Multiple Laptop Transport Case For 5 Laptops | Fits Most 15 to 16 in. Laptops
Review by peter
SKB H5020W Rail Pack Utility Case w/ Wheels
Review by Britt R
SKB Roto-Molded 37 in. Tripod Case w/ Wheels
Review by Wendy
SKB H4816W Rail Pack Utility Case w/ Wheels
Review by Amanda P
Secure Checkout
Typically Ships within 2 - 3 Days
No Restocking Fee
