Pelican 1770NF Long Wheeled Case with Empty Interior
Made in USA refers to a product that is virtually completely made in the United States of America. Any components not produced in the United States is negligible.
A Limited Lifetime Warranty combines aspects of both limited and lifetime warranties. It offers product protection for as long as the original purchaser owns the product, but with specific limitations and exclusions.
Satisfaction Guaranteed is a promise that we ensure our customers are satisfied with the quality of the products they purchase from us and that they are free from any defects in materials or workmanship. We do our absolute best to be sure everyone gets satisfactory service and support.
Watertight means that a case is sealed so that water cannot enter under normal conditions, typically when subjected to water pressure or splashing. Watertight usually refers to being sealed against leaks rather than being fully submersible.
This case is equipped with wheels that make transporting your gear smooth and effortless. The durable wheels allow you to roll the case with ease—no heavy lifting required. It's the perfect solution for professionals who need mobility without sacrificing protection.Pelican 1770NF Long Protector Transport Case with Wheels and Empty Interior. Hard Shell Case with unbreakable crushproof exterior protects your equipment.
- Empty Interior
- Strong Polyurethane Wheels
- Double Throw Latches
- Two Rugged Double-Wide Handles
- Watertight, Crushproof, and Dustproof
- O-Ring Seal
- Two Automatic Pressure Equalization Valves
- Four Extra-Deep Base-To-Lid Locking Cleats
- Stackable
- ATA Rated
- Military Grade Protection
- Open Cell Core with Solid Wall Design
- Injection Molded Exterior
- Stainless Steel Hardware
- Padlockable
- Def Stan 81-41/IP67/STANAG 4280/MIL STD 810G
- Guaranteed for Life
- USA Made
Interior Dimensions: 54.58 x 15.58 x 8.63 in.
Exterior Dimensions: 57.42 x 18.48 x 11.23 in.
Lid Dimensions: 1.88 in.
Base Dimensions: 6.75 in.
Weight: 29 Lbs.
Wheels: Wide-Track Polyurethane Wheels
UPC Code: 019428092764
Interior Options:
Empty Pick N Pluck Foam
Pelican 1770 Long Transport Case with Wheels and Empty Interior
Pelican Long protector cases are built in America with military standards and specifications. They are waterproof, dustproof, and crushproof. Load up rifles, weapons, or even trade show equipment in soft, shock absorbing foam. These are favorites of the military because they get the job done and they last forever no matter how much abuse they take. Lifetime Guarantee
- Interior: Empty
- 1770 Long Shipping Case has inside dimensions 54.58 x 15.58 x 8.63 in.
- Four extra-deep base-to-lid locking cleats that ensure maximum stacking stability
- Wide-track polyurethane wheels with ball bearings and nylon hubs
- Watertight, Crushproof, and Dust Proof
- Pad lockable with stainless steel protected hasps
- Injection molded ultra-high impact structural copolymer exterior
- Easy open double throw latches
- Two rugged double-wide handles
- Two Integrated Automatic Pressure Equalization Valves
- O-ring seal
- Open cell core with solid wall design – strong, light weight
- Stainless steel hardware
- Unbreakable crushproof exterior
- Lifetime Guarantee
- Proudly Made in the USA
UPC Code:
1770NF – 019428092764
PROTECT WHAT MATTERS WITH MILITARY GRADE PROTECTION
No matter the job, the Pelican Protector Case is the standard in offering your equipment the protection it needs and deserves.
SOLID CONSTRUCTION: The Pelican™ Protector Case™ uses an open cell core and solid wall construction, which is actually stronger and lighter than a solid core wall. Travel light with heavy protection.
DOUBLE-THROW LATCHES: Double-Throw latches are smarter and easier to open: it’s the classic ‘C’ clamp design with a secondary movement that works like a pry bar to start the release and offers plenty of leverage to open with a light pull.
WATERTIGHT: The secret is the tongue-and-groove fit with a polymer o-ring acting as a waterproof seal. Also, our Automatic Pressure Equalization Valve releases built-up air pressure while keeping water molecules out, resulting in a watertight case that is easy to open.
TESTED: The Pelican Protector Case design is the result of multiple generations of refinement. This evolution is proven through submergence and other lab tests.
EASY RIDING: Stainless steel ball bearing wheels (on select cases) last longer and ride smoother. The nylon hub adjacent to the stainless steel resists heat resulting in less wear and tear on the polyurethane tire.
| SKU | 1770NF |
|---|---|
| Brand | Pelican Cases |
| Interior Options | Empty |
| Interior (LxWxH) | 54.58 x 15.58 x 8.63 in. |
| Exterior (LxWxH) | 57.42 x 18.48 x 11.23 in. |
| Weight | 29 Lbs. |
| Color | Black |
| Lid Depth | 1.88 in. |
| Base Depth | 6.75 in. |
| Max Temperature | 210 Degrees F |
| Min Temperature | -40 Degrees F |
| Max Buoyancy | 280 Lbs. |
| Wheels | Inline Edge Wheels |
| Handle | Double Wide Handles |
| Latches | Double-Throw Latches |
| Removable Lid | No |
| Lockable | Pad-Lockable |
| Stackable | Yes |
| Body Material | Polypropylene |
| Latch Material | ABS |
| O-Ring Material | Polymer |
| Pins Material | Stainless Steel |
| Foam Material | Polyurethane |
| Purge Body Material | ABS |
| Purge Vent Material | 3 Micron Hydrophobic Non-Woven |
| Purge O-Ring Material | 70 Shore Nitrile |
| Water Resistance | Watertight |
| Rating | ATA Rated |
| Certifications | Def Stan 81-41, IP67, STANAG 4280 |
| Transporting and Shipping Options |  Small Package Service refers to cases that can ship via UPS, Fedex or USPS and would be charged a standard rate based on the weight. Cases must weigh less than 150 lbs. and meet certain dimensional requirements. Always check the carrier’s small package policy for exact limits. Oversized Checked Baggage refers to cases that can be checked on the airlines but could incur oversize fees. Typically oversize fees can be applied to cases between 50-100 lbs and between 63-126 inches overall. Overall dimensions of the case are determined by adding the length, width and height together. Always check your airline’s specific policy, as size and weight limits can vary by carrier and route. |
Empty
1770NF – No Foam Interior.
Pick N Pluck Foam
1770 – The Pick N Pluck™ Foam is shock-absorbent, pre-scored Foam in tiny cubes. The item is placed on the foam, outlined with chalk, and then the cubes around the item are removed to form a secure, protective cocoon. It is the easiest, fastest method for providing a cut-out for individual items. Best for shipping same items repeatedly. Also known as cubed or diced foam.
Pelican 1770 Product DatasheetNo videos available for this product.
PELICAN LIMITED LIFETIME GUARANTEE OF EXCELLENCE
Pelican Products, Inc. guarantees its products for a lifetime against breakage or defects in workmanship. Pelican™ injection molded cases are guaranteed to be watertight to a depth of 3.3 feet (1 meter) for 30 minutes (IP 67) if properly closed with undamaged o-ring in place unless otherwise stated. To the extent permitted by law, Pelican’s liability is limited to the case and not its contents or foam. All warranty claims of any nature are barred if the container has been altered, damaged or in any way physically changed, or subjected to abuse, misuse, negligence or accident. For complete warranty details, see http://www.pelican.com/warranty or call Pelican at 800-473-5422. Lifetime Guarantee does not cover Roto Molded cases, RALS products, fabric portion of backpacks or smartphone cover accessories.
WHAT OUR CUSTOMERS ARE SAYING:
"Exceptional Quality and Service"
We've been sourcing hard cases and multi-laptop transport cases for our IT deployment teams, and this company has exceeded expectations. The quality is unmatched—durable, secure, and clearly made for professionals. Their customer service team is responsive, knowledgeable, and genuinely committed to helping. Highly recommend for any company needing a quality shipping case.
- Procurement Manager, Federal Contractor
"The Only Case Supplier We Trust"
We use their cases for secure field deployments, and they hold up to the toughest environments. Our reps always get quick answers and real solutions from their support team. Great partner for anyone needing rugged, high-quality shipping and transport options.
- IT Director, Defense Contractor
"Built for Professionals - Built to Last"
We ordered multiple cases to secure sensitive equipment and laptops. Not only did they arrive quickly, but the quality was outstanding. Custom foam inserts were a game-changer for our workflow. Cases came with a lifetime warranty. And any time we’ve had a question, their support team handled it fast and professionally.
- Facilities Manager, National Utility Company
"Top-Tier Cases and Even Better Support"
We needed laptop transport cases that could meet strict government transport standards. These cases were spot-on—secure, organized, and travel-ready. I was especially impressed by how proactive and helpful the customer support was. Their team helped us customize our order, and the process was smooth from start to finish. A great experience all around. Our organization will absolutely reorder.
- Logistics Coordinator, Municipal IT Tech Department
WHY CHOOSE SPECIALTY CASES?
SKB iSeries 3i 2011-10 Wheeled Shipping Case w/ Cubed Foam
Review by Oliver
SKB iSeries 3i 5014-6 Wheeled Shipping Case w/ Empty Interior
Review by Kelley
SKB iSeries 3i 3613-12 Wheeled Shipping Case w/ Think Tank Dividers
Review by Amanda
Gator Large Padded LCD Transport Bag
Review by Travel guy
28 in. Single / Dual Flat Screen Shipping Case
Review by Rodney
Secure Checkout
Typically Ships within 2 - 3 Days
No Restocking Fee
