Seahorse SE430FP2 2 Pistol Case
Seahorse 430 FP2 Two Pistol Case is virtually indestructible. Precut Foam designed to hold 2 Pistols and 8 clips. Large easy carry handle, maximum lockable security and TSA approved. TwistLock Latches ensure the case stays closed and waterproof. Protective die-cut foam cushioned bottom and convoluted lid foam.
- Secure Storage for 2 Firearms and 8 Mags
- Buoyancy: 15 lbs
- Weight Capacity: 40 lbs
- TwistLock Latches
- Soft Touch Large Carry Handle
- Optional Keyed Locking Latches
- Integrated Padlock Eyelets
- Accepts Standard and TSA Locks
- Meets ATA and Military Standards
- Waterproof
- Polycarbonate Shell
- Automatic Pressure Purge System
- Crushproof, Impact Resistant, Rust Proof
- MIL-STD 810F/IP67/MIL-STD-3010C/ATA 300/TSA Compliant
- Lifetime Warranty
- USA Made
Interior Dimensions: 11.1 x 8.2 x 5.6 in.
Exterior Dimensions: 13.6 x 10.7 x 6.3 in.
Weight: 4 Lbs.
Wheels: No Wheels
UPC Code: 659986106642
![]()
![]()
Seahorse 430FP2 Two-Pistol Waterproof Case
The #1 Protective Case with 2 Pistol, 8 Clip Precut Foam – The Seahorse 430 with Two Pistol, 8 Clip Precut Foam is the effortless, ultimate protection for firearms with a ready to use, multi-firearm setup. The case has solid polypropylene construction and easy to clean insert is precision designed for Semi-Automatics. Whether you are heading out to the gun range, traveling across the country, or need a lockable solution that is discrete for the home – this case ensures firearms stay inaccessible, locked, and secure.
Maximum Lockable Security and TSA Approved – Be confident in your secure gun storage with two side TwistLock Latches that prevent accidental opening, and a center eyelet for a combination lock or padlock. Easily meet TSA requirements with this TSA Approved, ATA-300 rated case. For flight travel with firearms, check this into TSA with any secure key or combination lock using the integrated eyelet. Metal Keyed Locks upgrade is also available.
2 Pistol and 8 Mag Storage – Equipped with a specialty closed-cell pre-cut foam, this case is ready to go and holds plenty of space for a two pistol and up to eight magazines. Compatible Pistols - 1911 Models though 3.5” - 6.5” Barrel. Beretta 92FS. Popular Glock Models such as G17, G19, G23, G32, G38, and G43. Sig Sauer Models including P226, P365, P229 as well as the Legion line. Enhanced versatility to fit specialized optics, flared magwells, and beaver tails.
Automatic Pressure Equalization – Built into the SE430's TwistLock Latches, is our Automatic Pressure Equalization System which automatically equalizes pressure upon opening. The TwistLock Latches ensure the case stays closed and waterproof. Designed with a large easy carry handle, no detail was overlooked with the Seahorse 430.
Waterproof, Crushproof, Adventure-Proof – Virtually indestructible, it’s built to withstand the elements. Rigorously tested to be rustproof and IP67 Waterproof, this tough case is also dustproof and impact resistant. Proven to float with contents under 15 lbs, it’s easily retrieved if dropped in water!
USA Made / Lifetime Guarantee – Seahorse stands on the integrity and quality of their full line of cases and manufactures EVERY case in the United States. Providing a lifetime guarantee against manufacturing defects is standard operating procedures.
- Secure Storage for Firearms
- Speciality Closed-cell PreCut Foam holds Two Pistols and Multiple Clips
- Crushproof, Impact Resistant, Rust Proof, Adventure-Proof
- TwistLock Latches with Automatic Pressure Equalization System
- Integrated Eyelet
- Easy-Carry Handle
- Metal Keyed Lock Upgrade Available
- Polypropylene Shell
- Weight Capacity: 40 Lbs.
- Buoyancy: 15 Lbs.
- ATA 300 / TSA Compliant
- Made to MIL-STD 810F Standards
- IP67 Waterproof
- Lifetime Guarantee
- Proudly Made in the USA
UPC Code:
SE430FP2 – 659986106642
| SKU | SE430FP2 |
|---|---|
| Brand | Seahorse Cases |
| Interior (LxWxH) | 11.1 x 8.2 x 5.6 in. |
| Exterior (LxWxH) | 13.6 x 10.7 x 6.3 in. |
| Weight | 4 Lbs. |
| Color | Black |
| Available Colors | Black, Desert Tan |
| Wheels | No Wheels |
| Handle | Molded |
| Latches | Double-Throw Latches |
| Lockable | Pad-Lockable |
| Water Resistance | Waterproof |
| Body Material | Polypropylene |
| Manufacturing Process | Injection Molded |
| Rating | ATA Rated |
| Certifications | IP67, MIL-STD 810F 512.4 |
| Transporting and Shipping Options |
No interior options available for this product.
No videos available for this product.
SEAHORSE CASES LIFETIME WARRANTY
Seahorse Cases are guaranteed against defects in materials and craftsmanship for the life of the case. Cases that have been modified are not covered under this guarantee. The case is guaranteed to be watertight when properly closed with an undamaged O-ring in place. Any liability, either expressed or implied, is limited to replacement of the case and not its contents. This guarantee is void if the Seahorse Case has seen excessive abuse or blatant neglect beyond normal and sensible wear and tear. To inquire about a replacements or more information, please contact our Customer Service department at (626) 339-6673

























