TM-S2317 Multiple Laptop Case For 7 Laptops | Fits Most 17 to 18 in. Laptops
Made in USA refers to a product that is virtually completely made in the United States of America. Any components not produced in the United States is negligible.
A Lifetime Warranty refers to a guarantee that the case is fully warranted against defects in materials and craftsmanship for the life of the case to the original owner. If your case breaks, we will supply replacement parts, repair the case, or replace your case for as long as you own it. Some conditions apply, please see individual manufacturer’s warranties.
Satisfaction Guaranteed is a promise that we ensure our customers are satisfied with the quality of the products they purchase from us and that they are free from any defects in materials or workmanship. We do our absolute best to be sure everyone gets satisfactory service and support.
Watertight means that a case is sealed so that water cannot enter under normal conditions, typically when subjected to water pressure or splashing. Watertight usually refers to being sealed against leaks rather than being fully submersible.
This case is equipped with wheels that make transporting your gear smooth and effortless. The durable wheels allow you to roll the case with ease—no heavy lifting required. It's the perfect solution for professionals who need mobility without sacrificing protection.Durable, Hard Shell Multiple Laptop Case Holds 7 Laptops.
- Holds 7 Laptops
- Fits Most 17 to 18 in. Laptops
- Pre-Cut Foam Slots
- Wheels and Pull Handle
- Lockable
- Watertight
- Trigger-Release Latches
- Lifetime Warranty
- Made in the USA
- MIL-C-4150J/IP67/MIL-STD-648C/MIL-STD-810H
Laptop Slot Size: 16 x 11.5 x 1 in.
Accessory Compartment Size: 15 x 6.5 x 11.5 in.
Exterior Dimensions: 25.63 x 19.5 x 15.63 in.
Base / Lid Depth: 11.5 in. / 2.5 in.
Weight: 24.5 Lbs.
Wheels: Wheels and Retractable Pull Handle
Lockable: Hasps for Combination Locks and TSA Key Locking Latches Available
GTIN: 00850024704978
Specialty Cases TM-S2317-7LT-13 Multiple Laptop Shipping Case Holds 7 Laptops
Multiple Laptop Case holds 7 laptops. When you need to safely transport multiple laptop computers, there is no better choice out there than our signature laptop shipping case TM-S2317-7LT-13. Quality, precut foam inserts protect fragile electronic equipment from shock and impact damage while on the move. The individual compartments for each device makes a much simpler task of loading, shipping, unloading, and even inventorying.
The case shell is molded of ultra high-strength polypropylene copolymer resin, featuring a gasketed, water and dust tight, submersible design (MIL-C-4150J / IP67) that is resistant to corrosion and impact damage. This injection molded, Mil-standard waterproof case features a molded-in hinge, patented trigger release latch system, comfortable, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve (MIL-STD-648C), resistance to UV, solvents, corrosion, fungus and impact damage (MIL-STD-810F).
- Fits Most 17 inch to 18 inch Laptops
- Foam Interior Fits 7 Laptops and Accessories
- 16 x 11.5 x 1 in. Laptop Slot Size
- 15 x 6.5 x 11.5 in. Accessory Compartment Size
- Heavy Duty Retractable Pull Handle
- Two Inch Wide Skate Style Wheels for Easy Transport
- Industrial Strength Injection Molded Pull Handle
- Waterproof, Dust Proof and Impact Resistant
- Resistant to UV, Solvents, Corrosion and Fungus
- Temperature Protection from -69 to 180 Degrees F
- Injection Molded Mil-Standard Case Manufactured with a High Strength Polypropylene Copolymer Resin
- Ambient Pressure Relief Valve
- Trigger-Release Latches
- Molded-In Hinge for Added Protection
- Snap-Down Rubber Over-Molded Cushion Grip Handle
- Padlockable
- Includes Million Mile Warranty on the Case Shell
- Proudly Made in the USA
GTIN: 857515007204
Case Interior Description: This case includes a convoluted "egg-crate" foam in the lid, a cushioning pad and a polyethylene foam diecut insert in the base to secure the laptops. Accessory spaces are foam lined.
Additional Options: Built-In TSA Approved Key Locking Latches
| SKU | TM-S2317-7LT-13 |
|---|---|
| Brand | Specialty Cases |
| Designed To Hold | 7 Laptops |
| Laptop Slot Size | 16 x 11.5 x 1 in. |
| Accessory Compartment Size | 15 x 6.5 x 11.5 in. |
| Laptop Insert Direction | Vertical |
| Exterior (LxWxH) | 25.63 x 19.5 x 15.63 in. |
| Weight | 24.5 Lbs. |
| Lid Depth | 2.5 in. |
| Base Depth | 11.5 in. |
| Total Depth | 14 in. |
| Color | Black |
| Device Type | Laptop |
| Number of Devices | 7 |
| Wheels | Pull Handle Wheeled |
| Number Of Wheels | 2 |
| Retractable Handle | Yes |
| Lockable | Pad-Lockable |
| Max Buoyancy | 198 Lbs. |
| Min Temperature | -69 Degrees F |
| Max Temperature | 180 Degrees F |
| Water Resistance | Watertight |
| Manufacturing Process | Injection Molded |
| Body Material | Polypropylene |
| Transporting and Shipping Options |  Small Package Service refers to cases that can ship via UPS, Fedex or USPS and would be charged a standard rate based on the weight. Cases must weigh less than 150 lbs. and meet certain dimensional requirements. Always check the carrier’s small package policy for exact limits. Checked Baggage refers to cases that can be checked in on the airlines that are under 50 lbs. and 62 in. overall or less and would be considered standard size bags that would not incur an oversize fee. Overall dimensions of the case are determined by adding the length, width and height together. Always check your airline’s specific policy, as size and weight limits can vary by carrier and route. |
No interior options available for this product.
TM-S2317-7LT-13 Product DatasheetNo videos available for this product.
SKB CASES LIFETIME WARRANTY
SKB brand hardshell cases are fully warranted against defects in materials and craftsmanship for the life of the case to the original owner. That means, if your case breaks, SKB will supply replacement parts, repair the case, or replace your case for as long as you own it. Proof of Purchase is required for all warranty claims. Electronic components in SKB brand hardshell pedalboard systems are warranted for five years from date of purchase. Soft cases and gig bags are warranted for one year from date of purchase. SKB is not responsible for the shipping cost to our facility. However, SKB will cover all of the costs of repairs and/or replacements, as well as the return shipping. SKB hardshell cases are warranted for life to the original owner only. Cases used rental purposes, used by institutions or schools, modified or used cases are not covered by this warranty. To request a return authorization for a warranty claim, please contact our Customer Service Department at (800) 783-0087
SKB SOFT PRODUCT WARRANTY
SKB Soft Products are fully warranted to the original owner against defects in materials and craftsmanship for one year from purchase. Any defects in workmanship will be covered by SKB. Damages due to accident, improper care, negligence or normal wear, where SKB is not at fault, are not covered on Soft Products. Freight cost to SKB Corporation is the responsibility of the customer. SKB will pay the return freight for warranty product shipped back to the customer.
TRUSTED BY THE U.S. GOVERNMENT & FORTUNE 500 COMPANIES:
WHAT OUR CUSTOMERS ARE SAYING:
"Exceptional Quality and Service"
We've been sourcing hard cases and multi-laptop transport cases for our IT deployment teams, and this company has exceeded expectations. The quality is unmatched—durable, secure, and clearly made for professionals. Their customer service team is responsive, knowledgeable, and genuinely committed to helping. Highly recommend for any company needing a quality shipping case.
- Procurement Manager, Federal Contractor
"The Only Case Supplier We Trust"
We use their cases for secure field deployments, and they hold up to the toughest environments. Our reps always get quick answers and real solutions from their support team. Great partner for anyone needing rugged, high-quality shipping and transport options.
- IT Director, Defense Contractor
"Built for Professionals - Built to Last"
We ordered multiple cases to secure sensitive equipment and laptops. Not only did they arrive quickly, but the quality was outstanding. Custom foam inserts were a game-changer for our workflow. Cases came with a lifetime warranty. And any time we’ve had a question, their support team handled it fast and professionally.
- Facilities Manager, National Utility Company
"Top-Tier Cases and Even Better Support"
We needed laptop transport cases that could meet strict government transport standards. These cases were spot-on—secure, organized, and travel-ready. I was especially impressed by how proactive and helpful the customer support was. Their team helped us customize our order, and the process was smooth from start to finish. A great experience all around. Our organization will absolutely reorder.
- Logistics Coordinator, Municipal IT Tech Department
WHY CHOOSE SPECIALTY CASES?
Multiple iPad Carrying Case for 12 Tablets
Review by Amie R.
Multiple iPad Carrying Case for 18 Tablets
Review by EVG
SKB iSeries Field-Ready 4 M4/M16 Rifle Locker with Optics and Ammo Storage
Review by Bubba Gump
SKB iSeries 3i 3613-12 Wheeled Shipping Case w/ Think Tank Dividers
Review by Amanda
Secure Checkout
Typically Ships within 2 - 3 Days
No Restocking Fee
