NANUK case accessories help you organize equipment, refresh your case interior, and replace worn components. Shop foam inserts, padded dividers, lid organizers, panel kits, shoulder straps, TSA locks, desiccant containers, and replacement wheels, handles, and latches for compatible NANUK cases. Choose accessories around your case model and equipment needs to create a setup that works for storage, travel, and everyday use.
Nanuk Accessories
NANUK Case Accessories to Organize, Carry & Upgrade
Start with your exact NANUK case model, then confirm accessory compatibility, included components, and installation requirements before ordering.
Accessories Designed Around Your NANUK Case Configure and maintain your NANUK case with interior systems, carrying and security accessories, and replacement parts. Select options compatible with your exact case model to suit your equipment and transport needs.
Nanuk Accessories
Interiors, Organization, and Hardware for Nanuk Cases
A Nanuk case handles the outside. The interior decides whether your equipment arrives intact and whether you can find what you need when you open it. Start with how you want the inside laid out, then add the storage, security, and carry hardware around it.
Accessory categories
Shop Nanuk Accessories by Category
Everything here is listed per case model, so have your Nanuk case number to hand before you start. The first three categories are the ones most builds begin with.
The right interior depends less on what you carry than on how often what you carry changes.
The Kit Stays the Same
Use Foam Inserts for the tightest fit at the lowest cost. Pluck it once and it holds that layout for years.
The Kit Keeps Changing
Use Padded Dividers so the compartments move with the equipment rather than being cut in place.
Small Items Go Missing
Add Lid Organizers so cables and paperwork live in the lid where you can see them.
The Case Flies
Add Locks and Latches so screeners can inspect a checked case without cutting hardware off it.
A Laptop Travels Too
Add a Laptop Kit so the machine is protected separately from the equipment sharing the case.
Cases Get Lost or Swapped
Add Case Accessories to mount a tracker and carry shipping documents on the case itself.
Selection guide
How to Choose a Nanuk Interior
Start With the Case Number
Interiors are made for specific Nanuk cases, and a close model number is not a fit. Check the number on your case before ordering anything on this page.
Ask How Often the Layout Changes
Foam is cheap and permanent. Dividers cost more and move freely. If your equipment list has changed twice in the past year, dividers usually work out cheaper than buying foam again.
Measure Your Tallest Item
Depth is the constraint people miss. Check your deepest piece of equipment against the usable depth of the case base, especially if you also want lid storage.
Plan the Lid Last
A loaded lid organizer competes for the same closing clearance as whatever is in the base. Work out the base first, then see what depth is genuinely left above it.
Dry Fit Before You Pluck
Lay the equipment in the open case and mark the layout before removing a single cube. Plucked foam does not go back, and a rushed layout is the main reason a foam set gets replaced early.
Standardize Across a Fleet
If several people carry the same kit, identical interiors make handovers and inventory checks far quicker, and a missing item obvious at a glance.
Case model decides what fits. How often your kit changes decides which interior is worth paying for.
Nanuk Accessory FAQs
The questions that come up most when people are outfitting a Nanuk case.
Should I choose foam or padded dividers?
Foam gives the tightest fit and the lowest price, but the layout is permanent once plucked. Padded dividers cost more and let you rebuild compartments whenever the equipment changes. The deciding question is how stable your kit list is. A fixed kit is well served by foam for years; a kit that changes every few months usually costs more in replacement foam than a divider set would have cost once.
Will a lid organizer stop my case closing?
It can, and it is the most common reason lid storage gets returned. Measure the height of your loaded base contents, then compare the clearance left against the depth of the organizer when it is packed rather than empty. Cases with full-depth foam or tall equipment often have little usable lid volume. Send us your case model and what is in the base if the numbers look close.
Are TSA locks actually secure?
They are travel hardware rather than high security. TSA-recognized locks can be opened by screeners with a master key, which is the point: a checked case gets inspected and relocked instead of cut open. They deter casual tampering and keep a case closed through handling, but they are not the answer for protecting high-value contents from a determined attempt.
Do these accessories fit any Nanuk case?
Interiors and lid organizers are made for specific case models, so a set cut for one case will not seat correctly in another of similar size. Carry hardware like shoulder straps is less restrictive, but still check that your case has the attachment points a strap needs. If you are unsure which case you have, send us a photo and we will identify it.
Can I combine dividers and a lid organizer?
Yes, and it is a common setup: dividers or foam in the base for equipment, lid storage above for cables and paperwork. The limit is closing clearance. Add the loaded height of the base contents to the loaded depth of the lid storage and confirm the case still closes without pressing on anything.
Can Specialty Cases help me plan an interior?
Yes. Send your case model number, the dimensions and weights of what you need to pack, and how often the kit changes. We can recommend an interior, flag anything that will not clear on depth, and price it across a fleet if you are outfitting more than one case.
Dealer support
Interior Planning Support From Specialty Cases
We have been specifying protective cases and interiors since 1989. Send us the equipment and we will help you get the interior right the first time, rather than after a foam set has already been cut.
Fit and Depth Checks
Send your case model and item dimensions and we can confirm what will clear before anything ships.
Stock and Quote Support
Request a quote for availability and quantity pricing when outfitting more than one case.
Custom Foam Options
If no stock interior suits the equipment, ask about custom foam cut to your own layout instead.
Accessory comparison
Compare Nanuk Accessory Categories
What each category does and when it is the right call.
Swipe horizontally to compare all options.
Nanuk accessory categories by what they do, when they suit, and shopping path.
Category
What it does
Choose it when
Shop
Foam Inserts
Cubed, full set, and custom foam shaped around each item.
The kit is fixed and you want the tightest fit for the least money.
A case protects only as well as its interior. Items that shift against each other in transit are the ones that come out damaged.
Faster Packing and Checks
When everything has a fixed position, packing is quicker and a missing item is obvious before you leave rather than after.
An Interior That Lasts
Matching the format to how often your kit changes avoids paying twice, whether that is foam you re-cut or dividers you never needed.
Need Help Choosing a Nanuk Interior?
Send your case model number, the dimensions and weights of what you pack, and how often the kit changes. We will recommend an interior and flag anything that will not clear on depth.
