SKB iSeries 3i 2015-10 Wheeled Shipping Case w/ Think Tank Dividers & Lid Organizer
Made in USA refers to a product that is virtually completely made in the United States of America. Any components not produced in the United States is negligible.
A Lifetime Warranty refers to a guarantee that the case is fully warranted against defects in materials and craftsmanship for the life of the case to the original owner. If your case breaks, we will supply replacement parts, repair the case, or replace your case for as long as you own it. Some conditions apply, please see individual manufacturer’s warranties.
Satisfaction Guaranteed is a promise that we ensure our customers are satisfied with the quality of the products they purchase from us and that they are free from any defects in materials or workmanship. We do our absolute best to be sure everyone gets satisfactory service and support.
Waterproof means that a case is completely resistant to water and will not allow water to pass through it under specific conditions. Waterproof cases are designed to remain unaffected by water exposure, even when submerged, typically for a certain depth and duration as defined by standards like the IP (Ingress Protection) rating system.
This case is equipped with wheels that make transporting your gear smooth and effortless. The durable wheels allow you to roll the case with ease—no heavy lifting required. It's the perfect solution for professionals who need mobility without sacrificing protection.iSeries 3i 2015-10DL Waterproof Utility Case with Wheels and Think Tank Dividers and Lid Organizer Interior. SKB Flight Case can be checked in on airlines, or shipped UPS or Fedex. The Think Tank Dividers features a closed cell fitted foam liner, Nylex wrapped padded dividers, and heavy duty hook-and-loop tabs to ensure a secure, custom fit of gear. Also included in this case is an adhesive-backed hook-and-loop attached lid organizer with laminated clear mesh pockets and a polyester-lined iPad/laptop top-load pocket.
Interior Dimensions: 20.5 x 15.5 x 10 in.
Exterior Dimensions: 22.92 x 17.98 x 11.55 in.
Base & Lid Dimensions: Base: 8 in. | Lid: 2 in.
Weight: 14.2 Lbs.
Wheels: Pull Handle Wheeled
UPC Code: 789270100145
Interior Options:
Dividers and Lid Organizer Photo Dividers Photo Dividers and Lid Organizer Pick N Pluck Foam Empty Dividers
iSeries 3i 2015-10DL Waterproof Utility Case with Wheels and Think Tank Dividers and Lid Organizer Interior
SKB’s iSeries cases provide a revolutionary design that combines virtually indestructible construction with light weight and ease of use. These injection molded cases can serve multiple functions through their mil-standard, water submersible, dustproof design. Impact lab tests have proven them to be 2.5 times stronger than the competition, and better priced. Backed by SKB’s famous Million-Mile Warranty, you’ll have a reliable equipment transport case for life.
iSeries Injection Molded Mil-Standard Waterproof Cases are molded of ultra high-strength polypropylene copolymer resin, featuring a gasket sealed, water and dust tight, submersible design that is resistant to corrosion and impact damage. Features a molded-in hinge, patented trigger release latch system, comfortable, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve. The iSeries line is resistant to UV, solvents, corrosion, fungus and impact damage.
The Think Tank Dividers features Nylex-wrapped closed cell fitted foam liner, Nylex-wrapped closed cell foam divider with 90-degree body bend, Nylon dividers, High contrast grey interior and Heavy duty hook-and-loop tabs to ensure a secure, custom fit of gear. The lid organizer features laminated zippered clear mesh pockets for storage of cables, lens caps, or other small accessories. Behind the pockets is a polyester-lined tablet/small laptop top-load pocket. The organizer has a fully covered back panel that includes adhesive-backed hook-and-loop for secure placement in the lid.
- Interior: Think Tank Dividers and Lid Organizer
- Industrial strength injection molded pull handle with convenient push button release
- In-line skate style wheels for easy transport
- Waterproof and dust tight design (MIL-C-4150J / IP67)
- Molded-in hinge for added protection
- Trigger release latch system
- Snap-down rubber over-molded cushion grip handles for convenient carrying and lifting
- Ambient pressure equalization valve (MIL-STD-648C)
- Resistant to UV, solvents, corrosion, fungus (MIL-STD-810F)
- Resistant to impact damage (MIL-STD-810F)
- Million Mile Warranty
- Proudly Made in the USA
UPC Code:
3i-2015-10DL – 789270100145
THINK TANK DIVIDER FEATURES:
- 10 in. deep Nylex-wrapped closed cell fitted foam liner
- (4) Nylex-wrapped heavy duty hinged dividers
- Heavy duty hook-and-loop tabs
- (6) Nylex-wrapped closed cell foam pads
- (1) Nylex-wrapped heavy duty divider
- High contrast grey interior
LID ORGANIZER FEATURES:
- Laminated clear mesh pockets
- Large zippered clear side pocket
- Polyester-lined iPad/laptop top-load pocket
- Adhesive backed to attach securely to lid with hook-and-loop
| SKU | 3i-2015-10DL |
|---|---|
| Brand | SKB Cases |
| Interior Options | Think Tank Dividers and Lid Organizer |
| Interior (LxWxH) | 20.5 x 15.5 x 10 in. |
| Interior Cu. Volume | 1.84 cu ft |
| Exterior (LxWxH) | 22.92 x 17.98 x 11.55 in. |
| Exterior Cu. Volume | 2.75 cu ft |
| Carton Dimensions | 22.25 x 18.75 x 12 in. |
| Weight | 14.2 Lbs. |
| Color | Black |
| Lid Depth | 2 in. |
| Base Depth | 8 in. |
| Max Temperature | 180 Degrees F |
| Min Temperature | -69 Degrees F |
| Max Buoyancy | 115 Lbs. |
| Wheels | Pull Handle Wheeled |
| Handle | Soft Grip Comfort Handle |
| Latches | Trigger Release Latch System |
| Lockable | Pad-Lockable |
| Stackable | Yes |
| Body Material | Ultra High-Strength Polypropylene Copolymer Resin |
| Manufacturing Process | Injection Molded |
| Water Resistance | Waterproof |
| Rating | ATA Rated |
| Certifications | IP67, MIL-C-4150J, MIL-STD-648C, MIL-STD-810F |
| Transporting and Shipping Options |  Small Package Service refers to cases that can ship via UPS, Fedex or USPS and would be charged a standard rate based on the weight. Cases must weigh less than 150 lbs. and meet certain dimensional requirements. Always check the carrier’s small package policy for exact limits. Checked Baggage refers to cases that can be checked in on the airlines that are under 50 lbs. and 62 in. overall or less and would be considered standard size bags that would not incur an oversize fee. Overall dimensions of the case are determined by adding the length, width and height together. Always check your airline’s specific policy, as size and weight limits can vary by carrier and route. |
Empty
3i-2015-10B-E – No Foam Interior.
Pick N Pluck Foam
3i-2015-10B-C – Case is filled with layers of pre-scored charcoal foam. It is the easiest, fastest method for providing a cut-out for individual items. Best for shipping same items repeatedly. Also known as cubed or diced foam.FOAM LAYERS:
-
Foam In Lid:
- 2 in. over 1 in. Convolute Foam
-
Base Foam Layers:
- Layer One – 1 7/8 in. Diced Foam
- Layer Two – 1 7/8 in. Diced Foam
- Layer Three – 1 7/8 in. Diced Foam
- Layer Four – 1 1/2 in. Diced Foam
- Layer Five – 3/4 in. Solid Foam
Think Tank Dividers
3i-2015-10DT – Nylex-wrapped closed cell fitted foam liner, Nylex-wrapped closed cell foam divider with 90-degree body bend, Nylon dividers, High contrast grey interior and Heavy duty hook-and-loop tabs to ensure a secure, custom fit of gear.
Think Tank Dividers with Lid Organizer
3i-2015-10DL – Think Tank Dividers with lid organizer featuring laminated zippered clear mesh pockets for storage of cables, lens caps, or other small accessories. Behind the pockets is a polyester-lined tablet/small laptop top-load pocket. The organizer has a fully covered back panel that includes adhesive-backed hook-and-loop for secure placement in the lid.
Think Tank Photo Dividers
3i-2015-10PT – Nylex-wrapped closed cell fitted foam liner, Nylex-wrapped closed cell foam divider with 90-degree body bend, Nylon dividers, High contrast grey interior and Heavy duty hook-and-loop tabs to ensure a secure, custom fit of gear.
Think Tank Photo Dividers with Lid Organizer
3i-2015-10PL – Think Tank Dividers with lid organizer featuring laminated zippered clear mesh pockets for storage of cables, lens caps, or other small accessories. Behind the pockets is a polyester-lined tablet/small laptop top-load pocket. The lid organizer has a fully covered back panel that includes adhesive-backed hook-and-loop for secure placement in the lid.
SKB 3i-2015-10B Product DatasheetSKB CASES LIFETIME WARRANTY
SKB brand hardshell cases are fully warranted against defects in materials and craftsmanship for the life of the case to the original owner. That means, if your case breaks, SKB will supply replacement parts, repair the case, or replace your case for as long as you own it. Proof of Purchase is required for all warranty claims. Electronic components in SKB brand hardshell pedalboard systems are warranted for five years from date of purchase. Soft cases and gig bags are warranted for one year from date of purchase. SKB is not responsible for the shipping cost to our facility. However, SKB will cover all of the costs of repairs and/or replacements, as well as the return shipping. SKB hardshell cases are warranted for life to the original owner only. Cases used rental purposes, used by institutions or schools, modified or used cases are not covered by this warranty. To request a return authorization for a warranty claim, please contact our Customer Service Department at (800) 783-0087
SKB SOFT PRODUCT WARRANTY
SKB Soft Products are fully warranted to the original owner against defects in materials and craftsmanship for one year from purchase. Any defects in workmanship will be covered by SKB. Damages due to accident, improper care, negligence or normal wear, where SKB is not at fault, are not covered on Soft Products. Freight cost to SKB Corporation is the responsibility of the customer. SKB will pay the return freight for warranty product shipped back to the customer.
TRUSTED BY THE U.S. GOVERNMENT & FORTUNE 500 COMPANIES:
WHAT OUR CUSTOMERS ARE SAYING:
"Exceptional Quality and Service"
We've been sourcing hard cases and multi-laptop transport cases for our IT deployment teams, and this company has exceeded expectations. The quality is unmatched—durable, secure, and clearly made for professionals. Their customer service team is responsive, knowledgeable, and genuinely committed to helping. Highly recommend for any company needing a quality shipping case.
- Procurement Manager, Federal Contractor
"The Only Case Supplier We Trust"
We use their cases for secure field deployments, and they hold up to the toughest environments. Our reps always get quick answers and real solutions from their support team. Great partner for anyone needing rugged, high-quality shipping and transport options.
- IT Director, Defense Contractor
"Built for Professionals - Built to Last"
We ordered multiple cases to secure sensitive equipment and laptops. Not only did they arrive quickly, but the quality was outstanding. Custom foam inserts were a game-changer for our workflow. Cases came with a lifetime warranty. And any time we’ve had a question, their support team handled it fast and professionally.
- Facilities Manager, National Utility Company
"Top-Tier Cases and Even Better Support"
We needed laptop transport cases that could meet strict government transport standards. These cases were spot-on—secure, organized, and travel-ready. I was especially impressed by how proactive and helpful the customer support was. Their team helped us customize our order, and the process was smooth from start to finish. A great experience all around. Our organization will absolutely reorder.
- Logistics Coordinator, Municipal IT Tech Department
WHY CHOOSE SPECIALTY CASES?
SKB H4816W Rail Pack Utility Case w/ Wheels
Review by Amanda P
SKB TSA Cable Combination Padlock
Review by Becky
Pelican V800 Vault Long Double Rifle Case with Wheels
Review by Tim
Multiple iPad Carrying Case for 18 Tablets
Review by EVG
Secure Checkout
Typically Ships within 2 - 3 Days
No Restocking Fee
