SKB iSeries 2011 Lens Case
Made in USA refers to a product that is virtually completely made in the United States of America. Any components not produced in the United States is negligible.
A Lifetime Warranty refers to a guarantee that the case is fully warranted against defects in materials and craftsmanship for the life of the case to the original owner. If your case breaks, we will supply replacement parts, repair the case, or replace your case for as long as you own it. Some conditions apply, please see individual manufacturer’s warranties.
Satisfaction Guaranteed is a promise that we ensure our customers are satisfied with the quality of the products they purchase from us and that they are free from any defects in materials or workmanship. We do our absolute best to be sure everyone gets satisfactory service and support.
Waterproof means that a case is completely resistant to water and will not allow water to pass through it under specific conditions. Waterproof cases are designed to remain unaffected by water exposure, even when submerged, typically for a certain depth and duration as defined by standards like the IP (Ingress Protection) rating system.iSeries 2011 Waterproof Lens Case SKB 3i-20118LENS military-standard waterproof hard case designed to fit six cinema prime lenses. Each lens slot has a diameter of 125mm and a base depth of 120mm. The useable lid depth is 35mm yield a maximum length of 155mm per lens. There are two removable foam discs provided to change the internal base lens height to 97mm to accommodate shorter lenses. The case is sized to meet airplane carry on standards.
Exterior Dimensions: 21.89 x 13.98 x 9 in.
Base & Lid Dimensions: Base: 6 in. | Lid: 2 in.
Weight: 9.2 Lbs.
Wheels: No Wheels
SKB iSeries 2011 Waterproof Lens Case
The iSeries 20118LENS Case (3i-20118LENS) case is the perfect companion case for the professional photographer. This case will hold six lenses such as the Canon Cinema Prime Lenses or Schneider Kreunznach Xenon FF Prime Lenses. Each lens slot has a diameter of 125mm and the base depth of each lens slot is a total of 120mm. The useable lid depth is 35mm creating a maximum length of 155mm per lens. There are two removable foam discs provided to change the internal base lens height to 97mm instead of the 120mm when needed. This case is the maximum approved size for airline carry on travel.
This iSeries Lens Case, (3i-20118LENS) has trigger release latches for quick but secure access. This custom waterproof case is made in the USA and is backed by SKB’s Unconditional Lifetime Warranty.
- Custom cut PE foam to fit six lenses 125mm in diameter
- Removable foam discs for longer lenses
- Unconditional Lifetime Warranty
- Ultra high-strength polypropylene copolymer resin
- UV, solvent, corrosion and fungus resistant (MIL-STD-810F)
- Complete gasket seal makes these cases absolutely watertight (MIL-STD-C-4150J)
- Automatic ambient pressure equalization valve (MIL-STD-648C & IP67)
- Resistant to corrosion and impact damage
- Molded-in hinges
- Rubber over-molded cushion grip handle
- Locking loops for a customer supplied lock
- Patented "trigger release" latch system
- Million Mile Warranty
- Proudly Made in the USA
UPC Code:
3i-20118LENS – 789270995772
SKB’s iSeries injection molded waterproof cases are constructed of ultra high-strength polypropylene copolymer resin and feature a gasketed, waterproof, submersible design (IP67) that is resistant to corrosion and impact damage. Its molded-in hinges, patented "trigger release" latch system, comfortable, snap-down rubber over-molded cushion grip handle, secure stacking, and automatic ambient pressure equalization valve (MIL-STD-648C) all contribute to its military grade design.
| SKU | 3i-20118LENS |
|---|---|
| Brand | SKB Cases |
| Interior (LxWxH) | 20.5 x 11.5 x 8.25 |
| Exterior (LxWxH) | 21.89 x 13.98 x 9 in. |
| Carton Dimensions | 23 x 15 x 11 in. |
| Weight | 9.2 Lbs. |
| Color | Black |
| Lid Depth | 2 in. |
| Base Depth | 6 in. |
| Wheels | No Wheels |
| Handle | Rubber Over-Molded Cushion Grip Handles |
| Latches | Trigger Release Latch System |
| Lockable | Pad-Lockable |
| Stackable | Yes |
| Body Material | Ultra High-Strength Polypropylene Copolymer Resin |
| Manufacturing Process | Injection Molded |
| Water Resistance | Waterproof |
| Rating | ATA Rated |
| Certifications | IP67, MIL-STD-C-4150J, MIL-STD-648C, MIL-STD-810F |
| Transporting and Shipping Options |  Small Package Service refers to cases that can ship via UPS, Fedex or USPS and would be charged a standard rate based on the weight. Cases must weigh less than 150 lbs. and meet certain dimensional requirements. Always check the carrier’s small package policy for exact limits. Maximum Carry-On Size refers to cases that are in the category of the largest case you can carry on the plane with you. Size cannot be larger in any dimension than 22 x 14 x 9 in. Always check your airline’s specific policy, as size and weight limits can vary by carrier and route. Checked Baggage refers to cases that can be checked in on the airlines that are under 50 lbs. and 62 in. overall or less and would be considered standard size bags that would not incur an oversize fee. Overall dimensions of the case are determined by adding the length, width and height together. Always check your airline’s specific policy, as size and weight limits can vary by carrier and route. |
No interior options available for this product.
No documents available for this product.
No videos available for this product.
SKB CASES LIFETIME WARRANTY
SKB brand hardshell cases are fully warranted against defects in materials and craftsmanship for the life of the case to the original owner. That means, if your case breaks, SKB will supply replacement parts, repair the case, or replace your case for as long as you own it. Proof of Purchase is required for all warranty claims. Electronic components in SKB brand hardshell pedalboard systems are warranted for five years from date of purchase. Soft cases and gig bags are warranted for one year from date of purchase. SKB is not responsible for the shipping cost to our facility. However, SKB will cover all of the costs of repairs and/or replacements, as well as the return shipping. SKB hardshell cases are warranted for life to the original owner only. Cases used rental purposes, used by institutions or schools, modified or used cases are not covered by this warranty. To request a return authorization for a warranty claim, please contact our Customer Service Department at (800) 783-0087
SKB SOFT PRODUCT WARRANTY
SKB Soft Products are fully warranted to the original owner against defects in materials and craftsmanship for one year from purchase. Any defects in workmanship will be covered by SKB. Damages due to accident, improper care, negligence or normal wear, where SKB is not at fault, are not covered on Soft Products. Freight cost to SKB Corporation is the responsibility of the customer. SKB will pay the return freight for warranty product shipped back to the customer.
WHAT OUR CUSTOMERS ARE SAYING:
"Exceptional Quality and Service"
We've been sourcing hard cases and multi-laptop transport cases for our IT deployment teams, and this company has exceeded expectations. The quality is unmatched—durable, secure, and clearly made for professionals. Their customer service team is responsive, knowledgeable, and genuinely committed to helping. Highly recommend for any company needing a quality shipping case.
- Procurement Manager, Federal Contractor
"The Only Case Supplier We Trust"
We use their cases for secure field deployments, and they hold up to the toughest environments. Our reps always get quick answers and real solutions from their support team. Great partner for anyone needing rugged, high-quality shipping and transport options.
- IT Director, Defense Contractor
"Built for Professionals - Built to Last"
We ordered multiple cases to secure sensitive equipment and laptops. Not only did they arrive quickly, but the quality was outstanding. Custom foam inserts were a game-changer for our workflow. Cases came with a lifetime warranty. And any time we’ve had a question, their support team handled it fast and professionally.
- Facilities Manager, National Utility Company
"Top-Tier Cases and Even Better Support"
We needed laptop transport cases that could meet strict government transport standards. These cases were spot-on—secure, organized, and travel-ready. I was especially impressed by how proactive and helpful the customer support was. Their team helped us customize our order, and the process was smooth from start to finish. A great experience all around. Our organization will absolutely reorder.
- Logistics Coordinator, Municipal IT Tech Department
WHY CHOOSE SPECIALTY CASES?
Pelican V800 Vault Long Double Rifle Case with Wheels
Review by Tim
SKB iSeries 3i 2011-10 Wheeled Shipping Case w/ Cubed Foam
Review by Oliver
28 in. Single / Dual Flat Screen Shipping Case
Review by Rodney
EX-1637 Multiple Laptop Transport Case For 5 Laptops | Fits Most 15 to 16 in. Laptops
Review by peter
Multiple iPad Carrying Case for 18 Tablets
Review by EVG
Secure Checkout
Typically Ships within 2 - 3 Days
No Restocking Fee
