Nanuk-R 910 Eco-Friendly Case with No Foam
A Lifetime Warranty refers to a guarantee that the case is fully warranted against defects in materials and craftsmanship for the life of the case to the original owner. If your case breaks, we will supply replacement parts, repair the case, or replace your case for as long as you own it. Some conditions apply, please see individual manufacturer’s warranties.
Satisfaction Guaranteed is a promise that we ensure our customers are satisfied with the quality of the products they purchase from us and that they are free from any defects in materials or workmanship. We do our absolute best to be sure everyone gets satisfactory service and support.
Waterproof means that a case is completely resistant to water and will not allow water to pass through it under specific conditions. Waterproof cases are designed to remain unaffected by water exposure, even when submerged, typically for a certain depth and duration as defined by standards like the IP (Ingress Protection) rating system.Nanuk-R 910 Eco-Friendly Case with Empty Interior is made from post-consumer recycled resin.
- Empty Interior
- Soft Grip, Ergonomic Handle
- Impact Resistant Recycled Resin
- Automatic Pressure Release Valve
- Integrated Bezel System
- Integrated Handle Stay
- PowerClaw Superior Latching System
- Padlockable
- ATA Rated
- MIL-Spec Injection Molded Case
- Waterproof IP67 Rated
- Dustproof and Indestructible
- Meets Airline Carry-on Regulations
- Stackable
- ATA-300/IP6x/IPx7/MIL-STD-810F/ASTM D-4169
- Lifetime Warranty
Interior Dimensions: 13.2 x 9.2 x 4.1 in.
Exterior Dimensions: 14.3 x 11.1 x 4.7 in.
Lid Dimensions: 1.31 in.
Base Dimensions: 2.8 in.
Weight: 3 Lbs.
Wheels: No Wheels
UPC Code: 666365075956
Nanuk-R 910 Eco-Friendly Protective Case with Empty Interior
The Nanuk NK-R910 Hard Shell Case is built to organize, protect, carry and survive tough conditions, the NANUK-R 910 waterproof hard case is impenetrable and indestructible with a shell in recycled resin and its PowerClaw superior latching system.
With NANUK’s exclusive locking and latching system, your case stays shut and secured until you are ready to open it. The NANUK-R 910 is built to take abuse so your gear doesn’t.
Lightweight, rugged and compact, the NANUK-R 910 hard case adapts to every environment. It’s a favorite of photographers, videographers, outdoor enthusiasts, sportsmen, law enforcement officers, military, hunters and shooting sports enthusiasts to protect their most valuable gear. The slim profile of the NANUK-R 910 protective case makes it perfect for protecting small laptops, tablets, small cameras, electronics, handguns, small drones, sample kits, compact tools, and equipment of all sorts.
The NANUK-R 910 protective case comes with a soft grip and ergonomic handle to make it easy to transport. It also features stainless steel hardware and integrated handle stay to keep the handle out of harm’s way when traveling or during shipping. This transport case is also equipped with an automatic pressure release valve and an integrated bezel system to accommodate custom panels without needing to drill holes so the case stays watertight.
The NANUK 910-R MIL-Spec injection molded case is backed by a lifetime warranty.
- Interior: Empty
- MIL-Spec Injection Molded Case
- Soft Grip, Ergonomic Handle
- Waterproof, Dustproof and Indestructible
- Impact Resistant Recycled Resin
- Automatic Pressure Release Valve
- 100% Stainless Steel Hardware
- Integrated Bezel System
- Integrated Handle Stay
- PowerClaw Superior Latching System
- Padlockable
- Stackable
- Meets Airline Carry-on Regulations (Check with your airline carrier before traveling)
- Lifetime Guarantee
UPC Code:
NK-R910 – 666365075956
Nanuk-R 910 Case Certifications
IMPACT
DEF-STAN 81-41 / STANAG 4280 - Designed to test resistance to impact (drop) test from a height of 1M. The empty case is dropped once onto its designated base and all perpendicular and parallel faces at an ambient temperature of 23°C.
HIGH IMPACT
ATA 300 CAT 1 - ATA Specification 300 - Category 1 Impact ensures that hard cases, like those meeting these standards, can protect delicate equipment from damage during transportation, even when accidentally dropped from a height, making them a trusted choice for safeguarding valuable gear in rugged travel conditions.
HIGH TEMPERATURE
DEF-STAN 81-41 STANAG 4280 Dry Heat - Designed to test resistance to high temperature/ low humidity climatic conditions. Case is conditioned to 70°C for a period of 48hrs in a climatic chamber. Case is removed from climatic chamber after 48hrs and inspected for damage or other abnormalities.
LOW TEMPERATURE
DEF-STAN 81-41 STANAG 4280 - Designed to test resistance to low temperature climatic conditions. Case is conditioned to -50°C for a period of 16hrs in a climatic chamber. Case is removed from climatic chamber after 16hrs and inspected for damage or other abnormalities.
ANTI DUST
IP6X - IP6X Ingress Protection certifies a product's complete resistance to fine dust particles, making it ideal for safeguarding sensitive electronics, ensuring they remain unaffected by dust in challenging environments such as deserts or construction sites.
WATER SPRAY
DEF-STAN 81-41 / STANAG 4280 - Designed to demonstrate the ability of the case to withstand exposure to continuous water spray that simulates natural rainfall. Spray nozzles are directed above the case at an angle of 45°. All four corners are simultaneously sprayed at a flow rate of 8” per hour for a period of 15 minutes. Once testing is complete the cases are inspected for leaks.
WATERPROOF
IP7X - IPX7 Ingress Protection signifies a product's waterproof capability, allowing it to be submerged in water up to 1 meter deep for 30 minutes, like a rugged smartphone case that shields your phone from water damage even when submerged briefly.
IMMERSION
MIL-STD-810F - The MIL-STD-810F Immersion Test is a military-standard evaluation to confirm that equipment, like hard cases, can endure submersion in water without suffering damage, ensuring their reliability in wet conditions.
The Nanuk-R 910 Advantage
Nanuk-R Collection
Sustainable Choices, Significant Impact
The goal? To reduce waste and avoid unnecessary strain on our planet's resources. Every case from this collection is a step towards a cleaner world, helping to divert waste from landfills and reduce environmental pollution.
Uncompromised Quality and Reliability
Quality is our promise – and these recycled cases are no exception. Each one undergoes strict quality control to ensure it matches the high standards of durability, reliability, and functionality that NANUK is known for. This Eco-Friendly case offers the same stellar protection as our non-recycled cases.
Joining the Movement Towards a Greener Future
Choosing a case from our R-Collection means more than just getting a durable home for your equipment; it's a statement. It's about being part of a larger movement towards sustainability and supporting practices that help preserve our environment for future generations.
Nanuk-R Recycled Case Components
The shell of the NANUK-R Collection is made from a minimum of 95% post-consumer recycled resin.
Recycled Resin: A Sustainable Revolution
The magic of the Nanuk R-Collection starts with the material: recycled resin, specifically post-consumer recycled resin (PCR). It's a fancy way of saying recovered PP from electronic waste is used, transforming it into high-quality resin. It’s not just recycling; it’s a rebirth of materials.
| SKU | NK-R910 |
|---|---|
| Brand | Nanuk Cases |
| Interior Options | Empty |
| Interior (LxWxH) | 13.2 x 9.2 x 4.1 in. |
| Interior Cu. Volume | 0.28 cu ft |
| Exterior (LxWxH) | 14.3 x 11.1 x 4.7 in. |
| Weight | 3 Lbs. |
| Color | Black |
| Lid Depth | 1.3 in. |
| Base Depth | 2.8 in. |
| Max Temperature | 140 Degrees F |
| Min Temperature | -20 Degrees F |
| Max Buoyancy | 17 Lbs. |
| Wheels | No Wheels |
| Handle | Soft Grip Comfort Handle |
| Retractable Handle | No |
| Latches | Powerclaw Latching System |
| Removable Lid | No |
| Lockable | Pad-Lockable |
| Padlock Holes Diameter | 0.300 in. |
| Stackable | Yes |
| Body Material | Made from Post-Consumer Recycled Resin |
| Case Shell Material | Made from Post-Consumer Recycled Resin |
| Latch Material | Nylon 66 |
| Handle Material | NK-7 High Impact Polypropylene, TPE |
| Pins Material | 304 Stainless Steel |
| Gasket Material | EPDM |
| Purge Value Material | Nylon 66, Gore Membrane, Silicone Washers |
| Water Resistance | Waterproof |
| Airline Check In | Yes |
| Airline Carry On | Yes |
| Rating | ATA Rated |
| Certifications | ATA-300, IP6x, IPx7, MIL-STD-810F, ASTM D-4169 - Drop Test, ASTM D-4169 - Vibration, ASTM D-4169 - Rainfall |
| Manufacturer SKU | 910SR000BK-0A0 |
| Transporting and Shipping Options |  Small Package Service refers to cases that can ship via UPS, Fedex or USPS and would be charged a standard rate based on the weight. Cases must weigh less than 150 lbs. and meet certain dimensional requirements. Always check the carrier’s small package policy for exact limits. Checked Baggage refers to cases that can be checked in on the airlines that are under 50 lbs. and 62 in. overall or less and would be considered standard size bags that would not incur an oversize fee. Overall dimensions of the case are determined by adding the length, width and height together. Always check your airline’s specific policy, as size and weight limits can vary by carrier and route. |
Empty
NK-R910 – No Foam Interior.
Pick N Pluck Foam
NK-R910F – Case is filled with layers of pre-scored charcoal foam. It is the easiest, fastest method for providing a cut-out for individual items. Best for shipping same items repeatedly. Also known as cubed or diced foam.
Nanuk-R 910 Product DatasheetNANUK LIMITED LIFETIME WARRANTY AND DISCLAIMER
Plasticase, Inc. ("Plasticase") warrants that the NANUK case accompanying this document (the "Case") will be free from defects in material and workmanship for the life of the Case, subject to the terms and conditions of this Limited Warranty and Disclaimer (the "Warranty").
Limitation
Limitation of Warranty The Warranty herein applies only to the original customer and is conditional upon the customer giving prompt notice to Plasticase of any discovered defects. Plasticase shall not be responsible for any other defects or damage, including, but not limited to, any defects or damage caused by or resulting from: (a) alterations to the Case by anyone other than Plasticase; (b) accident; (c) damage due to an intentional or negligent act of a third party; (d) abuse or negligence; (e) wear and tear.; (f) mishandling; (g) failure to use the Case in a safe and reasonable manner, or (h) force majeure. If the Case, in the judgment of Plasticase, shows evidence of having been altered, modified or repaired without the authorization of Plasticase, the Warranty herein shall not apply. THE WARRANTY SET FORTH ABOVE IS EXCLUSIVE AND NO OTHER WARRANTY, WHETHER WRITTEN OR ORAL, IS EXPRESSED OR IMPLIED. PLASTICASE SPECIFICALLY DISCLAIMS THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
Liability
Plasticase’s cumulative liability for damages of any kind whatsoever arising out of the use or possession of the Case, regardless of the form of action, whether in contract or tort, including negligence or strict liability, shall be limited to the purchase price of the Case. IN NO EVENT SHALL PLASTICASE BE LIABLE TO THE CUSTOMER OR ANY OTHER PARTY FOR EXEMPLARY, INDIRECT, SPECIAL, INCIDENTAL, CONTINGENT OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR POSSESSION OF THE CASE, INCLUDING THE VALUE OF THE CONTENTS OF THE CASE, WHETHER OR NOT PLASTICASE HAS RECEIVED NOTICE OF THE POSSIBILITY OR CERTAINTY OR SUCH DAMAGES OR LOSSES. THESE LIMITATIONS SHALL APPLY NOTWITHSTANDING ANY FAILURE OF ESSENTIAL PURPOSE OF ANY LIMITED REMEDY.
Repair
Repair or Replacement Plasticase’s obligation under this Warranty is limited, at its sole and exclusive option, to either the repair or replacement of the Case where a defect has been claimed and is determined by Plasticase to be present. Upon inspection by Plasticase, the Case or parts thereof that prove to be defective will be repaired or replaced at no charge, and the Case will be shipped back to the customer by Plasticase.
Returns
The customer must contact Plasticase in the event he or she believes the Case is defective and covered by this Warranty in order to open a warranty claim. Call Plasticase at 1-800-783-6883 between 9:00 a.m. to 5:00 p.m. Eastern Time, Monday through Friday to speak with a customer service representative. In some instances, it may be determined that parts can be easily installed by the customer and Plasticase reserves the right to ship replacement parts directly to the customer for installation. Otherwise, the customer must pay for shipping the Case to Plasticase at 1059 Boulevard des Entreprises Ouest, Terrebonne, QC J6Y 1V2, Canada for inspection. If the Case is defective, as determined solely by Plasticase after an inspection, the shipping costs will be refunded if proof of shipping is provided. No refunds of shipping costs will be made if the Case is not defective.
This warranty is subject to change and can be modified at Plasticase Inc. discretion.
TRUSTED BY THE U.S. GOVERNMENT & FORTUNE 500 COMPANIES:
WHAT OUR CUSTOMERS ARE SAYING:
"Exceptional Quality and Service"
We've been sourcing hard cases and multi-laptop transport cases for our IT deployment teams, and this company has exceeded expectations. The quality is unmatched—durable, secure, and clearly made for professionals. Their customer service team is responsive, knowledgeable, and genuinely committed to helping. Highly recommend for any company needing a quality shipping case.
- Procurement Manager, Federal Contractor
"The Only Case Supplier We Trust"
We use their cases for secure field deployments, and they hold up to the toughest environments. Our reps always get quick answers and real solutions from their support team. Great partner for anyone needing rugged, high-quality shipping and transport options.
- IT Director, Defense Contractor
"Built for Professionals - Built to Last"
We ordered multiple cases to secure sensitive equipment and laptops. Not only did they arrive quickly, but the quality was outstanding. Custom foam inserts were a game-changer for our workflow. Cases came with a lifetime warranty. And any time we’ve had a question, their support team handled it fast and professionally.
- Facilities Manager, National Utility Company
"Top-Tier Cases and Even Better Support"
We needed laptop transport cases that could meet strict government transport standards. These cases were spot-on—secure, organized, and travel-ready. I was especially impressed by how proactive and helpful the customer support was. Their team helped us customize our order, and the process was smooth from start to finish. A great experience all around. Our organization will absolutely reorder.
- Logistics Coordinator, Municipal IT Tech Department
WHY CHOOSE SPECIALTY CASES?
SKB H4816W Rail Pack Utility Case w/ Wheels
Review by Amanda P
Pelican V800 Vault Long Double Rifle Case with Wheels
Review by Tim
Multiple iPad Carrying Case for 12 Tablets
Review by Amie R.
SKB iSeries Field-Ready 4 M4/M16 Rifle Locker with Optics and Ammo Storage
Review by Bubba Gump
SKB H3611W Rail Pack Utility Case w/ Wheels
Review by Jon
TM-S2918 Multiple Laptop Case For 10 Laptops | Fits Most 17 to 18 in. Laptops
Review by Brian Schmoyer
Secure Checkout
Typically Ships within 2 - 3 Days
No Restocking Fee
