SKB GigRig Mixer Rack Case
Made in USA refers to a product that is virtually completely made in the United States of America. Any components not produced in the United States is negligible.
A Lifetime Warranty refers to a guarantee that the case is fully warranted against defects in materials and craftsmanship for the life of the case to the original owner. If your case breaks, we will supply replacement parts, repair the case, or replace your case for as long as you own it. Some conditions apply, please see individual manufacturer’s warranties.
Satisfaction Guaranteed is a promise that we ensure our customers are satisfied with the quality of the products they purchase from us and that they are free from any defects in materials or workmanship. We do our absolute best to be sure everyone gets satisfactory service and support.
This case is equipped with wheels that make transporting your gear smooth and effortless. The durable wheels allow you to roll the case with ease—no heavy lifting required. It's the perfect solution for professionals who need mobility without sacrificing protection.12U Top / 8U Front & Rear GigRig Portable Mixer Rack Case with 4 heavy duty locking caster wheels. Greater vertical mixer depth to accommodate deep mixers. Roto-molded design for superior strength and endurance.
Rack Units: 12U Top / 8U Front & 8U Rear
Rackable Width: 19 in. Standard EIA
Interior Dimensions: 22.25 x 19 x 28 in.
Exterior Dimensions: 23.5 x 24 x 29.5 in.
Weight: 68.6 Lbs.
Wheels: Caster Wheels
SKB GigRig Mixer Rack Case – with 12U Top / 8U Front & 8U Rear, the 1SKB19-R1406 is great for extra deep analog and digital mixers.
The SKB Gig Rig series has set the standard for mixer/rack cases for more than 15 years. The 4th Generation Gig Rig raises the bar yet again. Based on the 1SKB19-R1406 Mighty Gig Rig design, the 1SKB19-R1208 Gig Rig provides more versatility than previous generation Gig Rigs.
A 12U slanted rackmount on top, over an 8U rackmount in front, the 1SKB19-R1208 is perfect for bands that haul their own PA. The SKB AV-8 shelf can be added for a solid laptop holder! The roto-molded design gives it tremendous strength, and due to its stackable design, it is the ideal case for schools and churches that may need to store a lot of equipment in a tight space. For security, two locking twist latches keep your lid where it should be.
Roto-molded of Linear Low Density Polyethylene (LLDPE), the 1SKB19-R1208 Gig Rig has a uni-body construction that is extremely durable. The 7° angled top steel rails are 12U rack spaces with extra room in the back for cable connections. The lid provides enough space for cables to stay connected as well as, space for the optional 1SKB-AV8 retractable shelf. The front facing 8U steel rails provide enough space for amps or outboard gear. 8U Rear rack rails are included for additional mounting, storage and support.
In the same fashion as the Mighty Gig Rig, the lid can also be used as a pedestal for the 1SKB19-R1208 Gig Rig. By placing the lid on the bottom wheeled skid and locking down the Gig Rig on top, the mixer height has perfect performance position. The 1SKB-R1208 Gig Rig includes two injection molded extra-long handles, (one per side) for easy lifting in transport. Four heavy-duty locking castors complete the new Gig Rig.
- Accommodates deep mixers
- Greater Vertical mixer depth
- Provides Excellent Performance Height
- Roto-molded design for superior strength and endurance
- Accommodates the AV-8 retractable shelf
- Indestructible injection molded side handles
- Locking twist latches keep the lid where it needs to be while providing easy access
- Includes wheel set with locking casters for easy transportation
- Front-Facing 8 RU Steel Rails for Amps
- Rear 8 RU Rack Rails for Support/Mounting
- Will stack with the 1SKB-R1906 for additional rack units
- 7-Degree Angled Steel Rails /12 RU Spaces
- One piece, Linear Low Density Polyethylene base
- Cable Management in Rear
- Use the Lid for Pedestal
- Optional shelf is available for a secure laptop/mixer platform
- Includes Million Mile Warranty
- Proudly Made in the USA
UPC Code:
1SKB19-R1208 – 789270992474
| SKU | 1SKB19-R1208 |
|---|---|
| Brand | SKB Cases |
| Interior (LxWxH) | 22.25 x 19 x 28 in. |
| Exterior (LxWxH) | 23.5 x 24 x 29.5 in. |
| Carton Dimensions | 24 x 26 x 30.25 in. |
| Weight | 68.6 Lbs. |
| Color | Black |
| Rack Units | 28U (12U/16U) |
| Rack Depth | 22.25 in. |
| Depth Front Rail To Back Lid | 22.25 in. |
| Rail Type | Threaded Steel Rails |
| Wheels | Caster Wheels |
| Handle | Injection Molded Side Handles |
| Latches | TSA Trigger Release Latches |
| Body Material | Linear Medium Density Polyethylene (LMDPE) |
| Manufacturing Process | Roto Molded |
| Rating | ATA Rated |
| Transporting and Shipping Options |  Oversized Package refers to a case that is considered oversized by UPS and FedEx if the case has a length (longest side) exceeding 96 in. or has an overall size that exceeds 130 in. The formula used to determine the overall size is Length + Width x 2 + Height x 2. There is a shipping surcharge for oversized packages that will raise the price over the standard rate. A minimum weight of 90 lbs. would apply to the charge. Always check the carrier’s oversized package policy for exact limits. Oversized Checked Baggage refers to cases that can be checked on the airlines but could incur oversize fees. Typically oversize fees can be applied to cases between 50-100 lbs and between 63-126 inches overall. Overall dimensions of the case are determined by adding the length, width and height together. Always check your airline’s specific policy, as size and weight limits can vary by carrier and route. |
No interior options available for this product.
SKB 1SKB19-R1208 Product DatasheetNo videos available for this product.
SKB CASES LIFETIME WARRANTY
SKB brand hardshell cases are fully warranted against defects in materials and craftsmanship for the life of the case to the original owner. That means, if your case breaks, SKB will supply replacement parts, repair the case, or replace your case for as long as you own it. Proof of Purchase is required for all warranty claims. Electronic components in SKB brand hardshell pedalboard systems are warranted for five years from date of purchase. Soft cases and gig bags are warranted for one year from date of purchase. SKB is not responsible for the shipping cost to our facility. However, SKB will cover all of the costs of repairs and/or replacements, as well as the return shipping. SKB hardshell cases are warranted for life to the original owner only. Cases used rental purposes, used by institutions or schools, modified or used cases are not covered by this warranty. To request a return authorization for a warranty claim, please contact our Customer Service Department at (800) 783-0087
SKB SOFT PRODUCT WARRANTY
SKB Soft Products are fully warranted to the original owner against defects in materials and craftsmanship for one year from purchase. Any defects in workmanship will be covered by SKB. Damages due to accident, improper care, negligence or normal wear, where SKB is not at fault, are not covered on Soft Products. Freight cost to SKB Corporation is the responsibility of the customer. SKB will pay the return freight for warranty product shipped back to the customer.
TRUSTED BY THE U.S. GOVERNMENT & FORTUNE 500 COMPANIES:
WHAT OUR CUSTOMERS ARE SAYING:
"Exceptional Quality and Service"
We've been sourcing hard cases and multi-laptop transport cases for our IT deployment teams, and this company has exceeded expectations. The quality is unmatched—durable, secure, and clearly made for professionals. Their customer service team is responsive, knowledgeable, and genuinely committed to helping. Highly recommend for any company needing a quality shipping case.
- Procurement Manager, Federal Contractor
"The Only Case Supplier We Trust"
We use their cases for secure field deployments, and they hold up to the toughest environments. Our reps always get quick answers and real solutions from their support team. Great partner for anyone needing rugged, high-quality shipping and transport options.
- IT Director, Defense Contractor
"Built for Professionals - Built to Last"
We ordered multiple cases to secure sensitive equipment and laptops. Not only did they arrive quickly, but the quality was outstanding. Custom foam inserts were a game-changer for our workflow. Cases came with a lifetime warranty. And any time we’ve had a question, their support team handled it fast and professionally.
- Facilities Manager, National Utility Company
"Top-Tier Cases and Even Better Support"
We needed laptop transport cases that could meet strict government transport standards. These cases were spot-on—secure, organized, and travel-ready. I was especially impressed by how proactive and helpful the customer support was. Their team helped us customize our order, and the process was smooth from start to finish. A great experience all around. Our organization will absolutely reorder.
- Logistics Coordinator, Municipal IT Tech Department
WHY CHOOSE SPECIALTY CASES?
TM-S2918 Multiple Laptop Case For 10 Laptops | Fits Most 17 to 18 in. Laptops
Review by Brian Schmoyer
SKB H3611W Rail Pack Utility Case w/ Wheels
Review by Jon
Pelican V800 Vault Long Double Rifle Case with Wheels
Review by Tim
SKB H4816W Rail Pack Utility Case w/ Wheels
Review by Amanda P
SKB Roto-Molded 37 in. Tripod Case w/ Wheels
Review by Wendy
SKB iSeries 3i 3613-12 Wheeled Shipping Case w/ Think Tank Dividers
Review by Amanda
Multiple iPad Carrying Case for 12 Tablets
Review by Amie R.
Pelican iM3300 Long Storm Wheeled Case with Foam
Review by Tom2sail
Secure Checkout
Typically Ships within 2 - 3 Days
No Restocking Fee
